Bedrug + Bedrails Question

[Kingpin003]

Does anyone with a complete bedrug also have bedrails? It's it possible to use them in conjunction?

Looking into getting one- but would like to maintain bedrails- so I would appreciate insight from anyone who has tried.

Thanks!

Sponsored

 

[oneinch]

When I bought my Maverick BedRug it only covered the bed floor and the tailgate. It doesn't go up the sides. I haven't looked, do they now cover the sides? In any case and if it does, you'll have no problem mounting the rails over the BedRug. The BedRug does cover the sides in my F150. It isn't a problem mounting the Boxlink brackets over the BedRug.

 

[Kingpin003]

When I bought my Maverick BedRug it only covered the bed floor and the tailgate. It doesn't go up the sides. I haven't looked, do they now cover the sides? In any case and if it does, you'll have no problem mounting the rails over the BedRug. The BedRug does cover the sides in my F150. It isn't a problem mounting the Boxlink brackets over the BedRug.

Yeah, they make a full one that goes up the sides now. I think the sides attach to the bottom with a zipper or something. I was just worried it might be too thick to get secure.

Glad to hear it wasn't a problem on the F-150. I'm optimistic now. Thanks!

 

[oneinch]

You might, but probably not, need longer bolts. The sides are only about 1/4" thick uncompressed. You'll compress them tightening the bolts. And yes, the sides will zip to the floor. That's how the F150 is.

 

[RAnSD619]

Thanks OP. I’m also interested in the full BedRug and had the same questions. Also wondering if the BedRug forms so that you can still use the FlexBed notches?

 

[Kingpin003]

Thanks OP. I’m also interested in the full BedRug and had the same questions. Also wondering if the BedRug forms so that you can still use the FlexBed notches?

See this thread: https://www.mavericktruckclub.com/forum/threads/bedrug-full-liner-with-trifold-cover.28467/

 

[KCHahn]

Here's mine, with full bedrug liner and bed rails. Let local shop do the work for me. They're an authorized dealer/installer. And the Backflip MX4 Tonneau cover fits perfectly as well. Quite satisfied with mine

 

[Kingpin003]

Here's mine, with full bedrug liner and bed rails. Let local shop do the work for me. They're an authorized dealer/installer. And the Backflip MX4 Tonneau cover fits perfectly as well. Quite satisfied with mine

That is an awesome set up you have there! Hopefully mine ends up looking like that once my truck shows up.

Thanks so much for confirming that they work together!

 

[KCHahn]

That is an awesome set up you have there! Hopefully mine ends up looking like that once my truck shows up.

Thanks so much for confirming that they work together!

Form fitted to bed, flexbed works nicely.

 

[Moby]

I have installed the full Bed Rug in two Mavericks now . I removed the tie down brackets first ,also made my own bedrails with airplane track . I just use an awl to poke a hole in the bed rug were the bolts go . One thing I would do differently is not cut out the holes for the rear access hatches . The bottom of the hole is to close to the zipper and hard to reinstall the plastic cover after.

 

[RAnSD619]

What’s the difference between classic and impact? I know the material difference (TPO vs no TPO) but what is the experience difference (i.e. is Impact more cushiony etc.)?

Sponsored