Bedliner alternative questions

[squirlz]

Woolwax or Fluid film? I bet 1 spray can would be enough. You don't need a thick coat. Might have to reapply every few years, but for $15 you can't beat it. It would be a pain to remove if you ever needed to though.

Sponsored

 

[gp1200x]

Woolwax or Fluid film? I bet 1 spray can would be enough. You don't need a thick coat. Might have to reapply every few years, but for $15 you can't beat it. It would be a pain to remove if you ever needed to though.

You need more than one can and that stuff is not cheap. I think I used about 15 cans to do my truck underneath.

 

[Larrythelunatic]

Bed’s already painted. As long as the paint isn’t scratched, nor otherwise penetrated, put the drop-in right over it. You’re good to go.

 

[squirlz]

You need more than one can and that stuff is not cheap. I think I used about 15 cans to do my truck underneath.

You could have got the Woolwax kit with a gallon of material and a spray gun for that price. A thin coat would more that suffice to cover the bed. It is just to prevent water from sitting on the bed under the cover, you do not need it thick enough to protect from water splashing on it.

Sponsored