ADJUSTABLE END LINKS ISSUE

[kennygs22]

lowered with the H&R super sport springs.... well I have the dreaded clunking sound coming from the front end. took it back to the line up shop, everything was tight but they said could be the end links.plan on ordering the adjustable end links. I've read some posts where they installed the godspeed end links and the scales end links. From the info I collected is that they need to be approximate 7/ 8 inches longer than stock. . are these a universal fit and if so what is the correct thickness of the stud.. application is for the AWD eco boost... any info would be helpful

Sponsored

 

[22MavXLT]

You need at least 7/8" to an 1" longer than stock and 14mm is the stud diameter. Basically you will be looking for one that fits a 2015-2023 Mustang. I was the one who bought the Scales and they won't extend long enough. My stock ones are back on and have been ok for over 5000 miles now. When/if they bend or break I will replace them.

 

[kennygs22]

You need at least 7/8" to an 1" longer than stock and 14mm is the stud diameter. Basically you will be looking for one that fits a 2015-2023 Mustang. I was the one who bought the Scales and they won't extend long enough. My stock ones are back on and have been ok for over 5000 miles now. When/if they bend or break I will replace them.

thanks for the info......

Sponsored