Search results

Ever get this figured out? I have a scratching/scraping noise in mine on cool mornings. It almost sounds like a piece of paper is stuck between the wheel and column when I turn it. Goes away after I've been driving a bit. I have a '24 XL hybrid with ~600 miles.

Ever get this figured out? I don't have the audible click but not sure I've turned it that hard either direction but I have a scratching/scraping noise in mine on cool mornings. It almost sounds like a piece of paper is stuck between the wheel and column when I turn it. Goes away after I've...

Well that answers that! Did you rattle can yours with color matching or are you a body guy?

You sure the Ranger handle fits? It looks quite different

Yeah, I'm on the fence about painting the existing black textured ones. I don't know how fast the process with be from sanding, priming, painting, CC'ing and if I can be without my truck for long

Thanks for chiming in. If you notice my screenshots, the primed (Lariat) front right handle is absurdly expensive for some reason. Eyeballing it, on the XL, it appears to be identical to the rear door handles. Could I trouble you to take another peek at the front right and make sure there...

Yeah, I nearly went that route, for the handles anyway. Think I decided if I'm going to go through that much work, I rather it be a more permanent solution. Those handles ultimately just stick over the existing and I'm not sure of the lifespan of that plastic (or the tape holding them on). I...

Updated with photos

Yep, I wouldn't be paying that. I found a used set of OEM take-offs with tires.

Some of the GM trucks, the fuse has 2 positions, in say the top and middle position the 12v outlet is constant power, the bottom and middle position is accessory power. Very nice to be able to change it's behavior.

Maybe. The mirrors caps might be a better candidate for that. I'd think the handles get touched way too much and a TON of curves and of course a very small area.

I'm now on a full blown quest to color match the handles and mirror caps of my XL. I've become frustrated these just don't seem to be available anywhere. The one place that has them are like $400 for the handles. I was going to sand and paint my existing ones, it'd be a lot easier and with no...

Found a set of these (but OEM) from an Escape. Like the design, 19" seems like a good size for these trucks, anyone know if they fit correctly? https://www.factorywheelreplacement.com/products/2017-2019fordescape10112u45

I ended up pulling the trigger too. It has free returns, seems worth a roll of the dice.

Ordered

I ended up getting one out of a Nissan (the compass is amber) at the junkyard and installed it yesterday. Tucked the wiring along the headliner, down the passenger side A pillar airbag and directly to the fuse panel using fuse taps. Works fantastic. I found a 3 wire spool of wire on Amazon...

Yeah, I've never expected any sort of water tightness out of any soft cover I've owned.

Anyone tried this cheap tri-fold? https://www.ebay.com/itm/285550883537 There are several sellers on eBay pimping what looks to be the same cover at various prices. I've always had Extang covers but would prefer to keep my cheap truck cheap. Just curious if anyone has experience with this...

Seems I've read people having issues because of voltage drop due to the fade in/out on interior lights, you experience that? Was the mirror you bought 3 wires? I picked one up out of a Nissan today at the junk yard, has all the goodies. 3 wires, I presume it's power, ground and one for the...

I've never had a factory wireless charger that worked worth a damn.