Search results

I have non problem with it and am amused by the fact that it will go into park by itself when the truck is turned off.

If those were near me I would’ve jumped on them!

I was treated well at Varsity Ford in Ann Arbor. I have no experience with their service department.

Speaking of first oil change... I did mine a few days ago and was surprised to see that there was an opening in the under engine cover through which one could access the drain plug. It's not particularly well positioned for that, but it does work. What surprised me is that there seems to be a...

My factory filter was on rather tight as well. The socket types I have didn't fit, but I had this on hand which worked well. https://www.harborfreight.com/universal-3-jaw-adjustable-oil-filter-wrench-59175.html

The previously listed number for the Motorcraft coolant is the spec number. The part number is different (VC-13DL-G) and in this link...

It's not as though we had much snow and ice in SE Michigan last winter... Winter tires make a huge difference, and that's what I'll put on mine, at least by the second winter. My last two vehicles have been AWD.

For what it's worth..., I just installed one of these that I ordered from AutoZone, which was drop-shipped from AVS in early June, 2024. They seem to have resolved all the previous problems with hole alignment and interference on the fenders. Mine fit well. I don't think the suplied fasteners...

For what it's worth..., I just installed one of these that I ordered from AutoZone, which was drop-shipped from AVS in early June, 2024. They seem to have resolved all the previous problems with hole alignment and interference on the fenders. Mine fit well. I don't think the suplied fasteners...

For what it's worth..., I just installed one of these that I ordered from AutoZone, which was drop-shipped from AVS in early June, 2024. They seem to have resolved all the previous problems with hole alignment and interference on the fenders. Mine fit well. I don't think the suplied fasteners...

Thanks for the post! I had not seen this issue mentioned before and will see about checking for this interference problem and modifying mine before it's fully installed. By the way, by ordering a few other things I needed from Autozone online I was able to get a discount and free shipping with...

Marvelous. Thanks for the reply and reassurance. I just received mine yesterday. I'll practice on the wife's 5 year old Subaru first..., or maybe the hood of my tractor. :)

Looks Good! How do you feel about the Graphene now that you have had it for a while? Have you don't much to maintain it?

It's also not a big money maker for them, so it may not make sense for Ford to expand production capacity for this vehicle.

The thread specs are usually referred to by diameter and pitch. In this case it's 8mm in diameter and 1.25mm between each thread crest. Bolt pattern is a term used to define orientations between multiple bolts or threaded holes. If I were filling those holes in mine I would probably use...

They look good! What's the difference in offset and how different do they feel?

Here's the link the thread the OP mentions. It has a few more pictures than he shared etc. Thanks Again Aaron F! https://www.mavericktruckclub.com/forum/threads/window-regulator-panel-removal-for-sound-dampening-install.39136/#post-705256

Thanks Much for posting this! It is quite helpful. This will be one of my first project once mine arrives, probably next week.

Could you post pictures of the underside of the hood/protector? I’m curious about the attachment method and how much things contact the exterior paint, if at all.

No alternator and no starter…, this vehicle is going to hurt my head and drag me into the 21st century!