Search results

This is how much they rubbed when new the rubbing has stop now and the tires preformed excellently in the snow

245/70/R17 Falken wild peak AT4w 2" rough country lift kit. They lightly rub when full locking the wheel making U-turns. (You're not supposed to hold the wheel at full lock anyways) I think once the tires wear down a little it'll be better.

https://www.ebay.com/itm/155954630616?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=6zdggl_jq96&sssrc=4429486&ssuid=xhewatpyssa&var=&widget_ver=artemis&media=COPY Try this

I guess they are sold out. Let me find something similar for you when I get home. I searched high powered led 3157 led before and made sure I looked for something with an external ballast and a large heatsink on the bulb.

They lock in the fully open and fully closed, so if you're parked on a incline/decline or hill they won't chop you fingers off

AOLISHENG 1 Pair Heavy Duty Drawer Slides with Lock 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 44 48 52 56 60 Inch 380 lb Load Capacity Side Mount Full Extension Ball Bearing Industrial Locking Rail https://a.co/d/diFbKch I purchased a set of locking and a set of non locking, then put the...

I have the link for the rails posted somewhere on this thread. They are still holding strong. I think the wood will give out before the rails

I wouldn't use these for fog/driving lights, they are mounted too high and will probably blind ppl. I use them as a off road light bar. Or you can use low powered lights in place of them. Not sure how they would look pointed straight down to the ground. In any case I'd be happy to help you, I...

You run the relay to the power post. But you run power for the switch through ignition or parking lights if you want them to turn off automatically. Unless you got a cheap harness that's used direct power to the switch. I would buy a relayed harness to prevent the switch form getting worn out...

Check the fuse box. There should be a power cable from the battery going to the fuse box. Just make sure you fuse the wire going to it. If you post a pic of the engine bay and a closeup of the fuse box I can help you out.

Yes it will work for the raptor grille

The harness only provides output for parking lights, turn signal and DRL. Not high/low beams. I would get switch pros to add switches. It clean and wiring is simple also no messy relays and fuse boxes, small and also compact.

The signal is digital. I have tested and confirmed. Also emailed them, it is for parking lights and DRL only(I believe). The headlights always have power to the headlight module. a second wire is communication signal to activate high or low.

These only work for the halogen headlights not the LED headlights in the lariat trim. Side marker will work for auxiliary marker lights but high/low harness will not. I found the high beam signal at the BCM in the passenger kick panel. Haven't wired it up yet but will update when I get around to...

Thnx I'll contact them!

I only use them off road or when there's no one around.

You should change the tag to "warning, do not turn on"

I think the Original plan was the sync 4 system with the bigger screen but due to covid shortages the went with the older smaller units or whatever that had just to produce the vehicles I bet the next year or the year after will have the bigger screen with wireless AA and wireless car play.

I'm planing on putting the switch pros switchboard there.

You can also run a relay and get signal from the fuse box and use a fuse tap to a ignition controlled fuse and power it though the battery that way it'll always be on when the vehicle is running and off when the vehicle is off regardless of the headlight switch position. (Like oem) spdt relay...