Search results

Nearly 7 months… info in signature below.

It has been mentioned numerous times on this forum.

Mine changed weekly until delivery.

I can force my truck into Deep Sleep mode just by opening and closing the doors several times in a short period of time like you might do when you are cleaning the interior or arranging items inside. Starting the truck has always canceled the Deep Sleep mode for me.

It is very surprising that after driving your vehicle, that it remained in Deep Sleep mode.

SWITCHING ALL OF THE INTERIOR LAMPS ON AND OFF The lamps turn on under the following conditions: * You open any door. * You press a button on the remote control. * You press the all lamps on button on the overhead console. If you switch the all lamps switch button on the overhead console to...

That would eliminate Deep Sleep mode.

The lights will not turn on when you open the doors if the truck is in Deep Sleep mode.

Perfect spot for my garage door opener.

I think there might be slight differences in fabrication from cover to cover which would explain the different fitment issues that have been discussed. I still prefer this model over the folding MX4 because it doesn’t block the rear window view. Just be prepared to massage it a little to get the...

No, the side rails are installed as per the instructions so there’s no gap at the rear. The only difference with mine is how I dealt with the front seal.

Yes, I have the factory SIBL. I did use the thinner tape despite the instructions due to a poor fit with the thick tape. I also used two short pieces of the thin tape at the front of the bulkhead just to cover the exposed paint on the ends for a neater look. I installed the rails per the...

I bought mine there (my customer order) … no games on delivery. Paid MSRP, but they do have a $799 Doc Fee. No complaints.

I installed mine with the thin rubber seal strip curved up against the rear window instead of down on the bulkhead. I did have to trim a small amount of the wide side strip to do this. I don’t have any leaks doing it this way and it looks like a neater installation to me.

You’ve convinced me to give it one more try! 👍 If it works loose again, I’ll lick my $50 wound and walk away! 😂

The bottom plate that attaches to the side of the tailgate works loose after a few days on my truck, no matter how tightly I attach it. I am using Loctite, so the threads are not working loose. The problem seems to be the retaining nut turning/slipping within the slot from the jolt of closing...

👍 Mystery solved!

I don’t use either one, but you just got me thinking… I was using my Garmin GPS and I bet that device produced the alert tone instead of my Maverick! DUH!!!!!

I don’t know what technology activates the school zone alert chimes, but I did have the Lane Keeping Assist and Adaptive Cruise Control on. I was also driving on a state highway. The system alerted me multiple times on this 182 mile drive. I had never had any previous alerts when driving locally...

I discovered today that my Maverick chimes twice whenever I enter a school traffic zone. I wasn’t expecting that. Turns out it was my Garmin GPS unit that was the source of the chimes! 😂