Search results

Ok...food for thought here...I've been pondering subcooling my intercooler air charge with a/c refrigerant by rerouting the suction line through the air intake tubing. So, after the freon leaves the evaporator running it through a spiral tube with fins to lower the temp of the incoming air even...

To answer the question about the lights, I wired them with a remote controller to avoid pulling wires into the cab. I set them up to be somewhat protected by the brush guard. The rural roads in central Texas we have a lot of wild hogs and smaller deer that are very active. The smaller lights on...

Sorry really don't have a lot of pics

Nope, no lift, no cutting.....with factory tremor suspension. Only had slight contact near full turn between tire and fender liner(front only). So, with tire removed I used a heat gun, heated the fender liner and moved it 3/4 " back away from tire in that one spot on both sides by pressing on...

Thanks, but tried...Ordered a set of correct pattern and stud size from Spacer Experts. They arrived and had wrong studs in them. Contacted them and they claimed they were incorrectly made by their supplier with wrong stud size. So, I did build without the spacers. What I learned was it didn't...

Thank you. I had the dealer leave all interior plastic factory protection in it, and it towed on a flatbed wrecker to the customizing shop. We pulled the head liner, roof antenna and the front and back glass to add the stripes correctly. After the paint all cured, I've had it professionally...

After 4 years of waiting and wanting in Aug. 2025 I finally ordered my '26 Maverick. I had plenty of time reading /planning/researching products. So, what you see here is what works for me. Yes, those are factory rims with 255/70/17s, yes, I cut off the factory tow hooks and welded the brush...