Mabett | Maverick Seat Covers Available Now!

[FunctionSpec]

Buy “Mabett Seat Covers for Maverick” directly via
https://www.amazon.com/promocode/A6VWX24JTMQJR
25% discount for MTC

Finally, with the efforts of our logistics provider, our seat covers arrived ahead of schedule. You can buy directly through the URL above.
Please note:

Only 20 sets in stock, available in black, PU leather.

When you find it unavailable, you need to keep waiting for Amazon to list my remaining inventory

Brief Introduction

Made of PU leather, water proof and soft, environmentally friendly without odor.

customized according to the original car seat size.

Fully compatible with airbags and heated seats

It usually takes 20-30 minutes to install with video or paper instruction.

Free return and exchange for anyone who receive a bad product. If you feel our products are helpful, please do me a favor, comment on your order on Amazon, it will be a huge help to my business.

Delivered yesterday and installed today. Install went smoothly if you watch the videos posted. Paper instructions are pretty much useless. White gloves included helped with install as my fingernails kept digging into the material when tucking cover into all the areas.

An issue I ran into was the rear backrest cover. The velcro does not stick onto the back of the backrest. The material on the back of the backrest isn't "felty" or carpet enough for the velcro straps to stick onto. I'm looking into buying some velcro tape for it to stick onto.

Sponsored

 

[FunctionSpec]

Picture of the velcro straps not holding well and just coming off. If you rough up that backrest fabric so that it gets a little fuzzy, the velcro hooks will "hold" onto it. Not a solid hold but just enough to hold the cover on. Going to glue some pieces of felt on there for the velcro to secure onto. Going with maybe straps (although super long) instead of velcro for this part would have made this a straightforward install.

 

[Superbofo99]

Can someone reply to me when these are back in stock, thank you.

 

[Mikew555]

Delivered yesterday and installed today. Install went smoothly if you watch the videos posted. Paper instructions are pretty much useless. White gloves included helped with install as my fingernails kept digging into the material when tucking cover into all the areas.

An issue I ran into was the rear backrest cover. The velcro does not stick onto the back of the backrest. The material on the back of the backrest isn't "felty" or carpet enough for the velcro straps to stick onto. I'm looking into buying some velcro tape for it to stick onto.

Hey there! Mine will be here tomorrow. Overall, how do they look? Are you satisfied and how about the armrest in the back, does that look and work ok? Does the black look good? Thanks for the tip on the velcro , I'll definitely use your suggestion. Thanks

 

[FunctionSpec]

Hey there! Mine will be here tomorrow. Overall, how do they look? Are you satisfied and how about the armrest in the back, does that look and work ok? Does the black look good? Thanks for the tip on the velcro , I'll definitely use your suggestion. Thanks

Rear fold down armrest doesn't have an additional piece to cover it separately. It is uncovered and you unzip 2 zippers to have access to the armrest to fold down. It's just a flap that covers the rear armrest when folded up. It's the only negative but adding that piece would make the rear cover a bit complex.

Black looks great. It matches the interior well and looks factory.

 

[FunctionSpec]

Rear armrest access hole.

Installation tip: Had a hard time finding a place to hook those two hooks underneath the seat. There's a lot of plastic under there. The hooks are for the flap on the bottom of the backrest cover. If you hook onto the upper side rails it'll pull the flap flat. If you pull it straight or inward, the flap bunches up a bit in the middle and doesn't look clean.

 

[Mikew555]

Rear armrest access hole.

Installation tip: Had a hard time finding a place to hook those two hooks underneath the seat. There's a lot of plastic under there. The hooks are for the flap on the bottom of the backrest cover. If you hook onto the upper side rails it'll pull the flap flat. If you pull it straight or inward, the flap bunches up a bit in the middle and doesn't look clean.

Thanks so much for the pictures and the tip.. All advice is welcome

 

[Earhart]

Buy “Mabett Seat Covers for Maverick” directly via
https://www.amazon.com/promocode/A6VWX24JTMQJR
25% discount for MTC

Finally, with the efforts of our logistics provider, our seat covers arrived ahead of schedule. You can buy directly through the URL above.
Please note:

Only 20 sets in stock, available in black, PU leather.

When you find it unavailable, you need to keep waiting for Amazon to list my remaining inventory

Brief Introduction

Made of PU leather, water proof and soft, environmentally friendly without odor.

customized according to the original car seat size.

Fully compatible with airbags and heated seats

It usually takes 20-30 minutes to install with video or paper instruction.

Free return and exchange for anyone who receive a bad product. If you feel our products are helpful, please do me a favor, comment on your order on Amazon, it will be a huge help to my business.

These look great! Any plans to do this in navy blue to match the interior?

 

[E30andrew]

These look fantastic, hard to tell they are aftermarket. The price with the discount also seems to hit the mark for how quality they look. Can't wait until they are back in stock!

 

[MABETT]

Can someone reply to me when these are back in stock, thank you.
[/引用]
I will inform you when it is a available.

 

[MABETT]

These look fantastic, hard to tell they are aftermarket. The price with the discount also seems to hit the mark for how quality they look. Can't wait until they are back in stock!
[/引用]
It will be available within 2 weeks.

 

[MABETT]

These look great! Any plans to do this in navy blue to match the interior?

Next color option will be grey. Navy blue still have wait.

 

[Benilla]

Will these ship to Canada?

 

[robbyrob]

I will wait a bit after I receive my larat maverick
I want to live with the seats a bit before I slap a cover over them

 

[MABETT]

这些看起来很棒！有没有计划用海军蓝色来搭配内饰？
[/引用]
Already in production.

Sponsored