Aftermarket audio controls trim piece: Excellent

[KdeB]

What is that device displaying 15.3? Does it plug into the cig lighter to display volts? Thanks.

Good question… Curious myself. Looks like two USB ports below it.

And looks like a wireless CarPlay device plugged in to the port on the left.

Also note this XLT owner has abandoned the orange rubber organizer cover below this, in favor of black. Something we will do eventually — hoping to find an XL owner to swap black for orange piece.

Sponsored

 

[snowkarver]

Can’t get over what a difference that piece of trim makes. Had some Amazon credits, just ordered one for my Tremor!

 

[Milous]

What is that device displaying 15.3? Does it plug into the cig lighter to display volts? Thanks.

"USB C Car Charger Adapter with Volt Meter Battery Monitor"

Amazon:
https://www.amazon.com/Charger-Adap...th+volt+meter+battery+monitor+,aps,159&sr=8-1

 

[Milous]

And looks like a wireless CarPlay device plugged in to the port on the left.

"Geohyecc wireless Car Play adaptor"

Amazon:
https://www.amazon.com/gp/product/B0B4VG2FT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

[Flight Test]

"USB C Car Charger Adapter with Volt Meter Battery Monitor"

Amazon:
https://www.amazon.com/Charger-Adapter-Cigarette-Delivery-Compatible/dp/B08N4WKJMT/ref=sr_1_1?crid=2NSOERWRXOOK8&keywords=USB+C+Car+Charger+Adapter+with+Volt+Meter+Battery+Monitor&qid=1677351762&sprefix=usb+c+car+charger+adapter+with+volt+meter+battery+monitor+,aps,159&sr=8-1

Thanks bud. I thought that was it. I did some poking around and came up with this:
https://www.amazon.com/RKURCK-Unive...8&sprefix=rkurck+12v+temp,aps,102&sr=8-3&th=1

 

[KdeB]

Thanks for posting this. It looks great. I bought one and it’s sitting in my office with several other items I’ve bought for my Maverick scheduled to be built next week. I wasn’t sure about how it would look but after seeing your photo I have no doubt it will be a positive addition!

It looks like you have added the black plastic trim that fits over the selector knob, buttons and cup holders. How do you like that fit, finish and look?

Sorry, just noticed your last question. But no, we didn’t add any new trim over the gear selector knob, buttons and cup holders. What you see in the photo is what we got with the XLT interior.

(The XL has blue trim around there, right?)

The XLT has the black center trim … and also the orange front cubby console liner. If someone has a black rubber liner there from an XL that they’d like to swap, I’m looking to do so!

 

[bbhaag]

My XLT with radio trim bezel:

Looks good! Did you also do a screen/module swap? It looks like you have Sync 3 in an XLT which isn't a factory option.

 

[Milous]

Looks good! Did you also do a screen/module swap? It looks like you have Sync 3 in an XLT which isn't a factory option.

Nope, factory radio, Apple Car Play screen shown.

 

[Telemachus]

I wonder how much the XL version would be direct from Ford

 

[snowkarver]

So my Tremor finally arrived and this was the first thing I did, because it was by far the easiest mod. I am not a fan of aftermarket trim in general, but have to say that this is the first one I've seen where the vehicle looks even more stock than it did before.

I find it worth the cost, because you are constantly looking at that part of the dash. It also makes the buttons flush with their surround, which feels a bit more premium. Super nice piece.

 

[KdeB]

So my Tremor finally arrived and this was the first thing I did, because it was by far the easiest mod. I am not a fan of aftermarket trim in general, but have to say that this is the first one I've seen where the vehicle looks even more stock than it did before.

I find it worth the cost, because you are constantly looking at that part of the dash. It also makes the buttons flush with their surround, which feels a bit more premium. Super nice piece.

Yep, agree with all that. They matched the color and finish of the OEM plastic perfectly, and the fit is perfect.

. Just makes that area look right.

Sponsored