22 XL Lobo St Paddle shifters ,f150 Fog light Switch and Fog lights, Rotiforms Wheels Scale Suspension lowered and much more Oem Ford Accesories.

[Vtec87pr1]

Did not, will revisit

Ok let me know

Sponsored

 

[volksnuts]

Ok let me know

I didn’t realize you had to go into two difference modules to turn them on
BCM and IPC (I think it’s IPC?)
Got them enabled now
When I’m feeling frisky I’ll get the front bumper off and see if the Bronco Sport harness is getting power to the foglight plugs

 

[Vtec87pr1]

I didn’t realize you had to go into two difference modules to turn them on
BCM and IPC (I think it’s IPC?)
Got them enabled now
When I’m feeling frisky I’ll get the front bumper off and see if the Bronco Sport harness is getting power to the foglight plugs

Yes ipc its Instrument cluster

You dont have to take the bumper off yet to check for power first . Remove passenger side tire and remove the bolts for the fender undershield the plug its right there.

 

[Vtec87pr1]

Ok i had this morning time to check bcm from the ford maverick compared. To Ford Escape 2022

The white paper its Ford maverick as you can tell its missing Pin 6 and 7 wich on the yellow diagram that belongs to the Escape apears as pins belong to left and right fog lamps conectors.

In other words im going to remove my bcm conector and add those 2 pins and check its theres power coming oug of them if i get power means that theres a chance of not having to change the bcm. Thats what im going to try today.

Heres pics of diagrams and bcm location.

 

[Vtec87pr1]

I also suggest not doing this if you dont have any experience with electronics. As this could void your warranty. Im only doing it cause i work on ford and have the skills to work on electronics. Wires diagrams etc. I suggest having someone else with eletrical experience do it for you.

 

[Vtec87pr1]

It appears Bcm comes with the pins

 

[Vtec87pr1]

Im proud to announce it works added to 2 terminals on the bcm conector and got power coming out of them with 12 volts ....

Now need to send 2 wires to the front bumper and finish installing the fog lamps some day lol . Things you also need to enable for the fog lamps to work are in the pictures. You need to enable left and right fog lamp usage and put it on fog only .

I pull the pins from and Ford o2 Sensor i will try to find the pins from ford parts and give you guys the link.

 

[volksnuts]

Good job!

 

[Vtec87pr1]

I think it should do a DYI topic on this

 

[NoVaJimmy]

I think it should do a DYI topic on this

Well, this photo answered a question I had, whether or not the XL had a keycode for a wired keypad preprogrammed into it. Based on the "XXXXXXXX" shown in your photo I guess not.

 

[Vtec87pr1]

Heres the bumper conector.

 

[Vtec87pr1]

Other things i did today.

Finished all the harness now trying to install the fog on the front bumper or trying to figure out lol

 

[volksnuts]

The harness I bought for the front bumper has a different connector than the Maverick
So my plug and play hopes have been let down
Also my harness is missing the foglight wires
So I guess I’ll be adding the wires like you did

 

[Vtec87pr1]

The harness I bought for the front bumper has a different connector than the Maverick
So my plug and play hopes have been let down
Also my harness is missing the foglight wires
So I guess I’ll be adding the wires like you did

Yea . You going to have to do it manually like i did. Just take your time with the conectors they are a pain . Any questions let me know.

 

[Vtec87pr1]

Well had to take a week off the truck since i had covid and had to stay home . Bought a 3d printer and will try to make a bezel for the Fog lamp but for now this its the idea i got for the bracket. With the FX4 bumper.

Rough edition fog lamp and bracket idea . Until i get my 3d printer lol.

Sponsored