Mabett Auxiliary Roof Light Bar Kit - review 💡💡💡💡

Review: Mabett Auxiliary Roof Light Bar Kit for Ford Maverick
Vehicle Model Year: 2022–2026
Overview
the @MABETT Auxiliary Roof Light Bar Kit is an absolute game-changer for the Ford Maverick's front profile. Designed explicitly for the 2022 through 2026 model years, it seamlessly flows with the truck’s body lines, completely transforming its look to give it a much more aggressive, rugged, and premium stance.
Unboxing & Build Quality
Straight out of the box, the quality of this kit is highly impressive:
Components: The kit comes fully loaded with a robust base plate, a sleek gloss-black top housing panel, individual LED light pods, a complete wiring harness, an adhesion promoter, 3M double-sided tape, and all necessary hardware and tool's.
Light Pods: The heavy-duty LED pods feature solid rear heat-sinking fins. Assembly is incredibly straightforward, requiring just two screws per pod to lock them into the base housing.
Wiring: Mabett did a phenomenal job on the harness. The wiring features heavy-duty, waterproof snap-together connectors covered in high-quality protective sheathing.
Installation Process
Installation is extremely straightforward and can easily be done right on your tailgate or in the driveway.
Assembly: Secure the light pods to the base panel with two screws each, plug the internal waterproof connections together, and use the included snap-nuts to secure the main assembly.
Mounting & Wire Routing: The base plate mounts securely to the roof using the provided high-strength tape and hardware. The main wire tucks cleanly down the side channel of the windshield, hiding flawlessly underneath the factory weather stripping without any binding.
Under the Hood: Pop the hood to mount the included control box. Wiring is simple with dedicated positive and negative terminals. Hook it straight to your battery, tidy up the slack using the provided zip ties, and you're good to go. It results in an incredibly clean, professional-looking engine bay install.
Wireless Control: One of the best highlights is the included wireless switch controller. Because the button is completely wireless, you can mount the sleek, round remote anywhere inside your cab using double-sided tape—such as right below the center dash cubby—without drilling or pulling wires through the firewall.
Performance & Visual Impact
Once the top housing panel is snapped into place, the finished product looks like a high-end factory option rather than an aftermarket add-on.
Esthetics: It gives the Maverick a wider, tougher look that perfectly complements rugged features like a lifted stance or all-terrain tires.
Brightness: Even in full, direct midday sunlight, these LEDs are blindingly bright. While they require a night adjustment to dial in the perfect beam trajectory, daytime visibility alone proves that these will throw a massive amount of light down the trail or dark backroads.
The Verdict
Pros:
Premium build quality with robust waterproof connectors and heavy sheathing.
Clean, hidden wire routing with zero cabin drilling required.
Wireless control pod makes interior placement a breeze.
Completely transforms the truck's front-end presence.
Cons:
Requires patience to line up the roof tape perfectly on the first try so i recommend two people for this part.
If you are looking to add some aggressive styling and serious auxiliary lighting to your Ford Maverick, the Mabett Roof Light Bar kit is worth every penny. It delivers a professional, clean install that looks amazing on any build.
https://mabett4x4.com/products/ford-maverick-roof-top-light-bar

Update if you want to sear the eyeballs of all mammals with a 100 yard radius, this is exactly what you're looking for.
And no, unfortunately, the last picture is not my truck in a real environment.

Ill take some pictures tonight to show light output.. But this is basically what it is

Is it SAE/DOT, or equivalent Euro/Japanese approved lighting, or does it come with lens covers? Up here in particular, CVSE (Commercial Traffic Cops) and some RCMP love to give tickets for uncovered "Off-Road' lights.

I certainly like the profile of the bar however, and it looks like it would still work well with roof racks..

Mavtremor24 said:

Ill take some pictures tonight to show light output.. But this is basically what it is

Click to expand...

Update if you want to sear the eyeballs of all mammals with a 100 yard radius, this is exactly what you're looking for.

Hahaha, HRG

This seems like a very odd thing to say but I'm looking forward to pictures of seared eyeballs.

I bought a roof light bar last week but the lights only work when I press and hold the black button and as soon as I release it he lights go off. Do you know how I van fix this issue?

DEREK 777 said:

I bought a roof light bar last week but the lights only work when I press and hold the black button and as soon as I release it he lights go off. Do you know how I van fix this issue?

Click to expand...

I guess the first question I ask is, does your button click when you push it
..Ill take a picture of how my switchbox is wired up When I get off of work, I would recommend matching it to that Because I had to mess around with it.It was pretty confusing how they have the positive and negative marked on each terminal As positive negative negative positive... If that is not the issue, I would lead more to the control box itself being faulty, and I would get in contact with them for a replacement

I feel like these ChatGPT written posts should come with more disclosure. Like, you didn’t write the review, the photos are AI… did they provide the product as well? How are we supposed to know if you’re providing a legitimate review? Your post history is muddy in that sense as well.

Mavtremor24 said:

I guess the first question I ask is, does your button click when you push it
..Ill take a picture of how my switchbox is wired up When I get off of work, I would recommend matching it to that Because I had to mess around with it.It was pretty confusing how they have the positive and negative marked on each terminal As positive negative negative positive... If that is not the issue, I would lead more to the control box itself being faulty, and I would get in contact with them for a replacement

Click to expand...

Yes it does click when i push it. It worked when i first installed it but after a few test runs i pushed the button to turn them off and they didn't go off so i finally pushed the button on the box and they went off but only stay on when i press and hold the button. It's been a lot of issues with these lights for me, i melted the battery wire and had to order another one to use as spare parts and while taking the running wire out i cracked my windsheild, one out of 4 lights wasn't working unless the wire was taped down angled perfectly because it look like someone yanked the wire half way out of the port hole and trying to get that black cover on was a HUGE pain.

usedtobef150 said:

I feel like these ChatGPT written posts should come with more disclosure. Like, you didn’t write the review, the photos are AI… did they provide the product as well? How are we supposed to know if you’re providing a legitimate review? Your post history is muddy in that sense as well.

Click to expand...

It's a summary of an actual review.I did based on videos that I recorded... And I even said in the post that the last photo was not real, but it is my actual truck. The other photos are real as well... And being given a product does not determine whether if I'm going to give it a good review or not. If the product junk, I'm gonna say the product's junk free or paid for no matter what.

This is a quick one I snapped on my way to work this morning. I'll take actual pictures that show the distance of the light output tonight if I have a chance

S

DEREK 777 said:

Yes it does click when i push it. It worked when i first installed it but after a few test runs i pushed the button to turn them off and they didn't go off so i finally pushed the button on the box and they went off but only stay on when i press and hold the button. It's been a lot of issues with these lights for me, i melted the battery wire and had to order another one to use as spare parts and while taking the running wire out i cracked my windsheild, one out of 4 lights wasn't working unless the wire was taped down angled perfectly because it look like someone yanked the wire half way out of the port hole and trying to get that black cover on was a HUGE pain.

Click to expand...

Sounds to me, like maybe you reprogrammed The control box I'll see if I can find out any information on that.. That sucks that you've had so many problems with it. It was pretty easy and straightforward for me. Other than mounting the base plate to the roof was a little difficult with one person

Thanks for sharing!