Maxzina-🔧 Maverick FRONT FENDER LINER SET PD Event - NEW LAUNCH 25% OFF! 🔧

[rk06382]

Check the PM.I send the PM for the liner.

I replied to your PM.

Question: Is your FRONT FENDER LINER made from the same material as your Rear Wheel Shock Shield Cover?


FRONT FENDER LINER:

I purchased & installed a set of your Maxzina Rear Wheel Shock Shield Covers Compatible with 2022-2025 Ford Maverick. Below is my drivers side rear shock cover with green emergency release for the Hybrid gas filler door. I am planning to do a review.

Sponsored

 

[Maxzina]

I replied to your PM.

Question: Is your FRONT FENDER LINER made from the same material as your Rear Wheel Shock Shield Cover?


FRONT FENDER LINER:

I purchased & installed a set of your Maxzina Rear Wheel Shock Shield Covers Compatible with 2022-2025 Ford Maverick. Below is my drivers side rear shock cover with green emergency release for the Hybrid gas filler door. I am planning to do a review.

Yeah.Both for PE Material.

 

[rk06382]

Yeah.Both for PE Material.

Arriving July 28

 

[rk06382]

My Front Fender Liner Set arrived but I am testing my BAKflip. (It is raining! )

 

[Geo8866]

My Front Fender Liner Set arrived but I am testing my BAKflip. (It is raining! )

My Bakflip keeps the bed completely dry. Just take a small piece of the leftover foam liner and stick it in the little "crease" in the black bed trim towards the front of the bed. (I hope that description is understandable.)

 

[rk06382]

My Bakflip keeps the bed completely dry. Just take a small piece of the leftover foam liner and stick it in the little "crease" in the black bed trim towards the front of the bed. (I hope that description is understandable.)

I used 3/8" Foam Backer Rod to fill-in the gaps. See thread below:

I taped a two inch piece of 3/8" Foam Backer Rod to fill-in the gaps in the side wall.

Yellow arrow on sidewall gap & a 2nd backer rod in corner.

From underneath after install extra foam to seal gaps.

Sponsored