Maverick canopy

[junyamada]

Oh

Oh, that is much nicer. Yeah, I will get a quote for both but I may go with the steel version now.

Do confirm it with the seller first if the steel version is like that. I didn’t ask before for photos of the steel one so I’m not sure. If it’s the same as the one on Facebook, awesome!

Sponsored

 

[Iakona]

Do confirm it with the seller first if the steel version is like that. I didn’t ask before for photos of the steel one so I’m not sure. If it’s the same as the one on Facebook, awesome!

Yes. I will indeed once I get a response from the seller in the chat box on the Alibaba app. Lol

 

[Camodude]

I have been looking at these also. Do you know what these weigh (steel vs aluminum). Looking at the Alibaba site doesn't have that information. Thanks

 

[Dysco]

I went with this GoFast option. I have one of their tents on another truck and I really like everything about it. I wish it was a tiny bit taller, but it didn't change my MPG on the hybrid.

 

[Unixum81]

No worries, I got it for about $1,200 including shipping to the US. Took about 1-2 months to ship. Came in a pallet which I had to move immediately as it was left outside the apartment.

https://m.alibaba.com/x/xbK5Lzq?ck=pdp

The camper was around $700 then shipping around $400 which ended up around $1,200.

I assembled it alone (which was back breaking btw). Then I needed my brother’s help to mount it on top of the bed as it’s impossible for one person to lift it over.

Holding strong as its using the available holes for the tie downs on the bed. I used the clamps that I had from my rollup cover, even then, the mounting bolts for the camper is sufficient enough. There’s like 4 mounting sections for the camper to be held down to the bed.

hi! I just got something very similar to yours. I am about to put it together and I would really appreciate a word of advice. They sent a tube of glue and a roll of tape and I am not exactly sure in what order I should use those. The instructions sound a bit funny…I am attaching a picture. How did you waterproof the cap at the junctions of the panels?

thanks!!

 

[Buckshot62]

My topper will be delivered 2/18/25. Here is a link I found that may help you with assembly.

 

[Unixum81]

My topper will be delivered 2/18/25. Here is a link I found that may help you with assembly.

Thank you @Buckshot62 ! That's perfect.

The tube of black caulk they sent was in freezing temperatures for like 2 weeks before I could take the crate inside so I will replace it. I am also considering "upgrading" the hardware to use rubber gaskets (M8x24mm and M6x13mm) and matching fender washers everywhere. it is very little money and it should help with waterproofing. If the gaskets crack at some point because of the temperature changes I could always replace them when that happens.

L.

 

[Iakona]

My topper will be delivered 2/18/25. Here is a link I found that may help you with assembly.

I just ordered mine. Wish me luck and I am looking forward to receiving it. Have a good one.

 

[Buckshot62]

I just ordered mine. Wish me luck and I am looking forward to receiving it. Have a good one.

Good luck! and lots of patience. 62 days seemed like forever.

 

[Iakona]

Good luck! and lots of patience. 62 days seemed like forever.

Yeah. I'll have to figure out how to forget about it for a while. Lol.

Sponsored