-

[JJC]

-

Sponsored

 

[LC48]

Thanks for this post - mine should arrive Saturday and it's good to see they are a direct fit!

Now I just need to get my brackets figured out.

 

[Scooter66]

Thanks for this post - mine should arrive Saturday and it's good to see they are a direct fit!

Now I just need to get my brackets figured out.

Drill a hole in the stiff flat plate near the mid portion of the passenger fender by the coolant reservoir. Plenty of room and an “L” bracket probably comes with the catch can

 

[villageidiot]

ordered a set, i have the Buschur's catch can on mine, and other than that one fitting his kit is very nice, and about a 6 minute install, once you get the damn hose off!

 

[LC48]

Drill a hole in the stiff flat plate near the mid portion of the passenger fender

It is a good spot for sure,, but I have Mountune cans so my mounting will be a little different to allow draining and cleaning. I've knocked up a few templates, close but not quite right just yet....right behind the headlights would be perfect, but the brackets get more complicated there and I don't have a bending brake, just a good machine vise. Once I settle in it will go pretty quick, then shoot em and bake em.

 

[CubanRedneck]

... wondering if you figure out the release mechanism for the orange quick connect. I haven't so I am here waiting on the ones from eBay to finish the catch cam installation

 

[grumpyunk]

I posted here:
https://www.mavericktruckclub.com/forum/threads/orange-quick-connect.13195/#post-262307 and it may be helpful. Or not.

Sponsored