12 Volts to Dash Cubby adjacent to display

[brlr2000]

Has anyone found a simple way to route 12 Volts to the Dash Cubby (next to display) to power up phone charger with unsightly cables/wires hidden? Not sure if I can simply remove the display and find 12 volts, or do I need to remove more modules to get down to the 12 Volt cigarette lighter socket?

Sponsored

 

[shadow76]

Wiring 12v power to the Dashboard Cubby, and Center Dash Removal -- DIY how-to video

Might want to use this title in the search function.

 

[Webber71]

I did it. Once I removed the screen along with the cubby. There are spaces you can feed a wire over to behind the glove box. From there zip tie it out of the way and wire into the fuse box. I did not take any pics or videos b but it was pretty simple.

 

[FabMav]

Here’s a link for what you are looking to do

https://www.mavericktruckclub.com/f...d-center-dash-removal-diy-how-to-video.22115/

 

[brlr2000]

I did it. Once I removed the screen along with the cubby. There are spaces you can feed a wire over to behind the glove box. From there zip tie it out of the way and wire into the fuse box. I did not take any pics or videos b but it was pretty simple.

That's exactly the information I was looking for. Better than taking off every panel to get down to the cigarette lighter socket. Thanks!

 

[brlr2000]

Here’s a link for what you are looking to do

https://www.mavericktruckclub.com/f...d-center-dash-removal-diy-how-to-video.22115/

I had seen this video before, but it looked like a lot of work and possibly damaging some trim in the process.

 

[MINIhauler]

Here’s a link for what you are looking to do

https://www.mavericktruckclub.com/f...d-center-dash-removal-diy-how-to-video.22115/

Thanks! This video got me exactly what I wanted for a little nonsense

Sponsored