Search results

I agree that JB Weld is strong enough to fix this depending on the extent of damage. I also agree that the area has to be super clean and not have oil residue on it, which is probably close to impossible without removing the pan, at which point...

Without question. You could put them on steel rims, but if you keep an eye on FB marketplace there's a good chance you'll find a set of OEM aluminum wheels for a decent price, as I did.

First check the cubby holes in your door for loose items... If there are none, you'll have to start by taking the door pad off and seeing if it still rattles. If it does, it should be pretty easy to figure out where and to solve that. If it doesn't rattle with the door pad off, look into where...

Sealing the bed cover is one thing, but as many will tell you, the tailgate is a major source of water getting into the bed. I've put a commonly available tailgate gasket around mine that that has helped greatly. It's not 100%, but combined with careful installation of my Lomax Stance bed...

15 months, 13,000 miles, no problems at all.

The installation is clean and easy, with no damage to the paint or new holes needed. It goes between the underside of the hood and the rubber seal that runs across the front of the hood, if I remember correctly.

I put one on mine a year ago and have been happy with it. It seems like early versions had problems with inaccurately placed mounting holes, but mine was perfect. Mine has a bit of a gash in it so it clearly saved my hood from some damage. I don't seem to get a lot of bugs on my windshield...

Has anyone used the search feature?

It's not too difficult to remove the entire thing. Take your time and be careful. Having an assistant is a good idea, but I have a large wingspan and did mine alone.

'24 Hybrid XLT. 11 months, 24k miles and the only issues I have are some rattles I caused with less than careful speaker installation. I'll fix those soon. Many of my trips are short to do errands and take the dog to the park.

Did you re-apply the Fluid Film after the first winter?

It also implies that the driver saw them and kept going, and also that the person can hear, which the driver probably doesn't know. We can't know the specific situation, but it also seems like the driver could see the pedestrian and keeps going, which is at least stupid and rude. Ya, go ahead...

When did pedestrians loose the right of way?

I did and will take pics once it dries out a bit here. I do remember them being a nuisance. I also put a strip of aluminum flat stock on the inside of the vertical rail of the truck bed for the clamps to engage without damaging the bed at all.

As opposed to the dishonest truth...?

I have the LOMAX Stance as well and am glad I purchased it. Pretty versatile and tough. I was especially glad I chose it over other less expensive options when I saw a Ford branded one with hail damage. Careful installation and a tailgate gasket will keep the bed pretty dry.

There's no reason to run wires to the back of the vehicle for the speaker. Sound travels pretty well through air.

If I’m cresting a hill and someone is coming up the other side, at some point they’ll get their retinas challenged, regardless of how they’re aimed, unless it’s to low to be ineffective for the driver. I think they’re designed well and are easily aimed. I’m quite content with them, but did...

I've enjoyed having mine since last fall. I did use a different switch than provided, one that I could easily flip with gloves on. I do turn them off when other vehicles are around or they're not needed since the stock headlights are bright enough for others to object. I also live in an area...

A tooth brush on the areas I got other products on it, and this stuff. https://adamspolishes.com/products/graphene-vrt%E2%84%A2?_pos=1&_psq=VRT&_ss=e&_v=1.0