Search results

Thank you. Guess I lucked out and have the correct parts.

How thick is you radiator?

Part number on mine is LX61-8C607-BC. Its on the upper right hand corner below the air intake. Can't get my phone at a good enough angle.

Does anyone know the thickness of the actual 4k tow radiator? I called the dealership to set up an appointment to get the recall done but they said mine vin isn't listed for it even though it was a February build. Also if your Lobo has the correct fan if you could get the part number off the top...

Have mine scheduled September 8th. It looks to be a straight forward job.

Wrong fan and radiator.

Same with my feb built lobo, seems its going to be most of them. They put the wrong radiator and fan assembly. Was supposed to be the heavy duty like the tow package has.

Anyone using a banks idash pro on a 25my? Picked one up for cheap and only reads battery volts, called banks and they said it should work. Updated latest firmware and tried their recommended fixes but no go. Works in a buddies 24my just fine.

25 is different from the 24 and the 25 doesn't fit the lobo.

Said it wouldn't fit the tremor cause of the larger rdu and since the lobo uses the same unit I guess they assumed it wouldn't fit.

I went to mrt to be the first Lobo they did and I wanted the dual tip system like you have but they told me it wouldn't fit. So I went with the straight pipe system they offered for the tremor. I'll have a custom 3" system made down the road.

Not sure how well you can see from this picture but it a decent amount. Keep in mind there is a wiring harness on the passenger side that is right at the area you have to cut.

Lobo owner near southbend.

Hit me up with that also if someone could please and thank you.

Lowered on silvers.

Tinted my side marker lights.

Did you unbolt the upper shock mount or just unbolt the lower? If you did the upper, check the torque on those.

That's the factory plug on the truck side in that picture.

Update on the install. Shaved the keys off and the connectors went right together. I check the issue with the bottom turn signal bulb and found out my truck has a 6 pin connector, probably because being a lobo with the 702a package that has upgraded taillights. Checked the wiring from the...