Sponsored

Search results

  1. Where are my SC home folks at ?

    Close. Hartsville

  2. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    P

  3. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Sorry I forgot you were updating, ask Bill, he may know since he did update

  4. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Do you have the wiring diagram? If you look there are a number that should be also shielded I wrapped mine with shield tape Amazon. Like $8.00 There are others

  5. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Did you twist your wires as needed

  6. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

  7. Sync 4 APIM Upgrade Complete! (Help with Issues)

    What yr Apim did you use? And did you have to forscan both? I got a 2021 booted up on my 8” but still sound issues

  8. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    You got sound? can you share the coding? Txs

  9. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Looks good, hope programming works Bill did a 3 to 4. his programming is on here. May get yours going, I tried his also but still no sound. Strange we all have same issue.

  10. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Same issues. But Car play instant. Got to be programming did you have any codes? I had a full splash till I programmed according to Zack’s settings

  11. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    No I’m building a harness. There is a clip you need to depression then lift the locking arm forward to release de

  12. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Same issue, . From what Mike told me if any codes in Apim/ Acm it shuts off sound. Tried every forscan settings that everyone posted and still no good. I can see volume change in apim. I show 🔊in the apim settings . I got to believe ACM coding Im trying again today, if you figure please...

  13. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Ya. You’re doing a 3-4 . I started from scratch so mine is right in hand, hopefully Bill or others will chime that did a 3 to 4

  14. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

  15. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Had same issue I used needle nose to squeeze the release tab and used a screwdriver under the cable end and rocked back/forth. Used dielectric grease before reinstalling

  16. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I’ve done a couple and found a 2023 Escape dash harness at pull a part it had the power and 6 pin cable so it was easy to connect to jumper harness as most were are already jumpered.

  17. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    If you remove the locking cover from the Apim connector. Easy to follow the wires

  18. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I’m doing this now with Bills and capermikes help. I found Zack’s hard to figure out( just me lol) So caper Mike sent me his.

  19. APIM Swap Question

    Look at Rednecks video. I think he used a f150 apim

  20. Recover saved modules

    I’m following the Rednck 12” monitor install and before I delete my profile how do I recover the saved modules if it doesn’t work?Thanks




Top