Search results

I can't wait for my check for $4.71!!!!!!

I have the Redline strut kit installed and have not experienced the issue. However, the issue stems from the struts either pulling down on the hood or pushing it up (I can't remember honestly) while the hood is latched which will not allow the latch to fully release. I installed a Jeep hood...

I think the part of the dash @22LT is talking about is the light grey accent piece between the air vents, not the top of the dash. I've heard the grey plastic referred to as "Porta Potty grey".

Looks great! This is the exact set up that I want; 20% on the sides and a 5% stip on the windshield. My night vision is too poor to do a full windshield tint.

@Snafu12 looks good! I need to get mine tinted. I'm up in the New Port Richey/Tarpon Springs area. The Florida sun takes no prisoners. I was thinking 20% all around with a 5% strip for the windshield. Did you get full ceramic or nano-ceramic? I'm looking for IR and heat rejection primarily.

Finally installed my hitch that I purchased in May. It's a Curt 13504 Class III. Probably one of the easiest hitches I've ever installed. Now I have to get the trailer light harness. I'm also cooking up a hitch mounted backup light using a Rigid Ignite LED light and a steel hitch plug. More...

Installed a Console Vault under the rear seat. It's made very well but I was disappointed that the mounting hardware (1.5" self tapping bolts") only goes through the plastic trim and not through the sheet metal under the trim. I may have to pull the plastic trim out and see if longer bolts can...

Huh, you learn something everyday. I would have assumed that since these are unibody that all the panels would be welded on. My mind immediately went to some fiberglass box flare fenders. Hmmm... Or what about utility bed sides with storage boxes? Something like this:

All the screws except the one on the far right side don't actually attach that trim piece the the dash structure. It is held in by clips. The far right screw attaches to the dash structure but has a plastic clip which easily pulls out of the dash. I discovered this after I bought a phone mount...

Here is the mount: The mount is made from aluminum and has a 17mm ball on the end. Its designed to be used on a tripod but any 1/4-20 bolt or screw will thread into it. I simply removed the screen assembly and drilled a hole through the top of the cubby. Then I drilled a hole in the side of...

I have this kit on my 2023 XLT hybrid. The hardest part is contorting yourself under the dash. It comes with a T-harness and it's literally plug and play. It took like 5 minutes to install. After installation, just click lock-unlock-lock on your keyfob. The park lights will flash after a few...

Installed a Scangauge III. I'm using the included window mount for now but it's not as solid as I would like. I have the parts on order to construct a mount in the cubby next to the screen that should be bombproof. @GPSMan is a bad influence lol

Yep, it's a pretty cool technology. https://www.asme.org/topics-resources/content/shrinking-exhaust-resonator-new-automotive-design

I've been looking at Console Vaults for a little while now. Specifically the one for under the rear seat. Ford sells them under accessories but I found a better deal. If you go to Console Vault's website, the rear Console Vault is on sale for $323.20. I found a coupon code online. Add the rear...

I ended up buying the front side window shades as well. They fit great. The Florida sun takes no prisoners.

I've often thought of that. The spray on bed liner is pretty tough once it dries. One downside is the rough texture would hold onto dirt and road grime though. I wonder if it would be worth it to pull the fender liners and spray the back side of the liner. Hmmm...

I would like to subscribe to your newsletter. I 100% would have ordered a Kodiak Brown Maverick. The Bronco Sport is available in that color; why isn't the Maverick?

The shifter detents could definitely be a lot more positive. The dial shifter in my 2015 Ram 1500 was pretty chunky. And the shifter had stops at P and D. I never mis-shifted in that truck. I did have an embarrassing moment in the Mav though. I was going through an automated carwash and didn't...

Hopes and dreams? I think it's a felt lined plastic though. It's not very durable.

Mine was self inflicted as I was trying to get the damn side marker lights out and ended up gouging the plastic and scraping the paint 🤦‍♂️