Search results

Note to self: Back up my BCM configuration before going in for the recall. Thank you!

Same. I bought a FORScan license the week my truck arrived and started the upgrades. Honestly the truck is a great value; but, the modifications from this forum make it fantastic. :)

This is a Bronco Sport Outer Banks 6.5" instrument cluster ( M1PT-10849-ANF) that I purchased so I could swap the gauge face with my Maverick cluster. 12,569.3 miles on the odometer. I believe it to be fully functioning; however, I didn't drive my Maverick with this dash installed. I did hook...

And here I was thinking that I was done modifying my Mav. *sigh* ;)

@NoVaJimmy - Thank you very much for being extremely helpful by answering so many of my questions and thank you for going through all the effort to sell me the Bronco cluster. 😁 I really like the way the dash looks and I think I'm finally done with modifications. That is until someone discovers...

Does the truck need to be going downhill for it to engage? Or, will it maintain speed if activated on a flat road?

I think I figured it out. I had to enable Hill Descent Control in both the IPC and ABS modules. At least it now notifies me on the IPC when I press the button. I need to find a nice hill to test it as I assume (wrongly?) that it won't engage on a flat area.

@NoVaJimmy - I'd like some input from you when you have time. :) I received my molex pins and got going on the project. I could see that Pin 7 on the IPC connector (C220) was already present and running to Pin 10 on connector C302 (the connector that interfaces to the center console). I...

@BoboysTruck - What dashcam are you using? I looked through the thread and didn't see it mentioned. Thank you!

I just updated my 23 XLT (non FX4) to add the two FX4 drive modes and my FORScan menu for ABS looks like yours. I did enable the Baja and Rock/Crawl modes but they didn't show up on the menu when scrolling through modes. So, I set those back to disabled.

Can you elaborate on the 'easy' mode? Was there something you just enabled through FORscan? And, do your traffic signs show up as squares instead of circles?

I did some disassembly this evening and wanted to report on my findings. Both the console switch connector and the IPC connector appear to be Molex 34729 series. https://www.molex.com/en-us/part-list/34729 Which means both take Molex female terminal 348033212...

I'm gathering parts to add hill descent control to my 2023 XLT and I have a couple of questions I'm hoping someone can answer. For the console switch connector C3010, what female connector did you use (for pin 2)? I couldn't find a service part number for this one. For the IPC connector C220...

Can you provide a copy of the link? I'd like to inspect it and see if I can find the file elsewhere.

I'm also seeing small drips on the inside of both the driver and passenger side. I purchased my Mav back in May and have had no leaks until this week. Last week one of my kids did drive this truck to Colorado where it experienced 10 degree nights so I wonder if a window seal shrank a bit?

When you have a moment, can you provide the full part number located on the bottom of the cluster?

I might have the same issue - I'm able to hit the answer button on an incoming call but I can't hear the caller and they can't hear me. I've not tried making an outgoing call first. I assumed it was some strangeness associated with my hearing aids which are paired to my iPhone. Unless you or...

Was there a different part number on the non FX4 cluster v.s. the FX4 cluster? Also, did you need to perform any forscan programming to get the 6.5" console working?

Here's the one I purchased: https://www.ebay.com/itm/145222215831 I did not have to remove the cover when I swapped to the Toyota mirror or when I added the risor.

I installed a Toyota Frameless Homelink Mirror (PT374-00210) and it's great except that I can't raise the mirror as high as I'd like. On one of the many Mav FaceBook groups, someone mentioned they used a "toyota yaris mirror riser" and a quick google search showed me several options. I ended up...