Search results

If your not shy about tapping into wires the interior Fuse block is the place to go Here's a video I did several years back

Contact some window tint guys, they should be able to hook you up

There are federal laws that regulate manufactures signals & lighting to be 12V, they also require low voltage (under 50V) to user controls to reduce shock hazards Manufactures have been trying for years to get the laws changed to 48V

Im talking about the feed for the 2 power points in the box Under that trim there's some white plastic boxing for the harness & the harness is not wrapped there. On my 25 they split the circuit on 2 fuses & wiring runs down both sides. On 22 to 24 they use a single circuit that splits under the...

That 22GA wire can only handle 5A max & I know Ford doesn't make a power point socket with that connection. You could always tap into one of the box power points, the wiring runs down the right rear sill panel. You could also check connector C302 pin 40 for a white & brown wire & extend it to...

The wiring diagram shows both the rear power outlet & usb charge ports at the back of the consol. I would pull the cover off & see if the connector is there taped back to the harness You may be able to have both

Its not a camera & the extra reverse wiring is to disable dimming when in reverse

Forscan cant do it. & if you disconnect the speaker your going to get a warning message. Only way to get rid of the sound is to put in a resistor with the same value as the speaker

Where does the 4th person sleep?

The enable/disable DRL menu for Canada works on my 25 2.0

Instrument Panel Cluster & Image Processing Module A

Those old EEC systems only sampled the the atmospheric pressure once when you turned the key on using the MAP sensor. If you shut it off & restarted it at your higher altitude it would take a new sample of the true pressure & you would get most of the power back. It would also run like crap when...

Was going to make a comment......Il get back to you

Looks a little heavy for a hybrid

Its a Shelby...5.2 Supercharged

You need to put a stripe on it if your parking beside the mustang

Went over some train tracks pretty fast the other day Think I got about 6" off the ground

I've repaired lots of rodent damage like that Sprays don't work all that great The best solution is to get a squirrel trap & get rid of them at least a mile away or any other method to make sure they never return Best $40 you'll ever spend Now that its peed all over your truck, its a magnet for...

Don't think APIM will fix it, clearly all the other modules point to a communication problem with the ACM. Its possible there's a problem on HS3 but I doubt it as most of the complaining modules are downstream of the ACM & they don't complain about modules upstream of the ACM

If you pull on the lamp while turning the screw with a cordless driver it should walk right out Don't push on the driver, just let it rotate the screw