Search results

You don't wanna apply in that location, its gonna get all over your filter and blower motor and potentially fry some electronics.

yup it worked, stuff coming out of the drain hole was nasty...you can drill a hole anywhere in the ducting after the blower fan, just make sure the fan is on full blast so it pushes the foam into the evap coils. The hole I drilled in pics is right behind the glove box, can't miss it.

No blinker light, no care. And it looks weird. And 200?! Hard pass.

I don’t know about an “after blow” setting but a good thing to do once a year would be to flush out the evap coil. Easiest way to do this is drop the glove box and drill a small hole to fit the applicator tube into the duct. I used Nextzett Klima Cleaner. Moldy mildew smell is gone without...

I had these, they sucked, fitment is off and your suppose to stick them to the rubber window trim…comes off easy…sticking to the paint makes them look off, do yourself a favor and get the EGR in channel ones. Waaaaay better.

🙈🙉🙊

It’s giving me mad max vibes.

It’s a known problem it seems. Gotta open them up and reseal them with silicone upon arrival.

Same. Mine is no longer working either.

All it does is reprogram the Knock sensors to detect an engine failure from the improperly polished crankshafts or whatever it was they did wrong at the factory so the engine will shutdown BEFORE it explodes. It doesn’t actually fix anything because they can’t pinpoint which trucks got them and...

Can cause problems for you if you hit a pedestrian and they found out this was installed. It's there for a reason, even with it, I always have people zipping in front of me in parking lots then jump in surprise when they see me.

Very cool thanks! All verbal commands work for me, but if I wanted to change “car” to “truck” would I just change the title of the shortcut and Siri would take that as the new verbal command?

What’s the tongue weight on that bad boy? Looks like you got some squat

Looks like a rubber plug to the firewall, look up inside the drivers foot well and see if you can find a gaping hole to your engine.

Deets on light bar install?

whose gonna tell him? 🙊🙈

Yes.

SOLD!

It’ll rub and wear through the fender liner in the pinch weld in the back 🙊🙈

Oooohhhhh they gonna rub