Search results

It failed again. This time cycling the truck, and cycling the screen, did not bring it back. Yes, speaker with resistor and cap are working fine when tested with an alternate sound supply, external jack off my shop radio. any idea what to do now. I can't understand how just unplugging and...

I searched he forums and discovered the B&O screen reset. I didn't get to do it. I started the truck again and the center speaker started playing. The screen booted with the Ford logo and then when the radio started all speakers, including the center, were working. Maybe cycling the truck on...

I went to swap out the center console B&O speaker for an Infinity Reference. Check polarity. Installed the resistor and capacitor. Swapped the original OEM socket. When I plugged it in and started the stereo, I get no response out of the speaker at all. Desoldeded the plug and moved it back...

Looking to change out the center speakers with the ref-3032cfx. I'll add the 4 ohm 50W resistor. Question is do I need the supplied inline capacitor, or does the B&O system already supply a filtered output. If there isn't a capacitor on the OEM speaker, I'm thinking it must be a filtered...

I don't want to go the extreme of upgrading the sub, just want to change speakers. The success with the 6.5 in the 6.x9 original enclosure are all positive. So to just change speakers I would put the DA 6.5 on a pices of plywood over the factory enclosure and use it infinite volume. The only...

Thanks, that helps. The reason I wouldn't just go to an 8" woofer in a sealed enclosure, is the required enclosure volume is larger than for the 6.5 and I want to locate the enclosure in the same location. I did read that the sealed enclosure takes more power, and I have no idea of how much the...

Reading a little about sealed enclosures vs infinite volume. From what I'm reading a sealed enclosure makes the bass 'tighter' and more true to the original music while the infinite volume makes it more 'booming'. Since this threaded started out with discussion of the Dayton Audio DCS165-4...

Is there a trick to removing the left and right dash tweeter covers. Found only one youtube video of it, and the guy said he broke the clips on each one. Any advice?

I wanted to get the mirror at a level to the bottom of the plastic. when I took mine off and played with the positions, the geometry didn't seem to get it where I wanted it. its only one screw and it pops off (up to take it off) so try for your self. The other thing I tried that added a...

Yes, I was a bit blunt and I apologize to all if I came across too strong. Just that ordinary people don't understand the problems we 'tall' people go through. I can't find a shoe store withing 50 miles that stock size 14W shoes. I can't buy shirts in Walmart. Most cars, I can't even get...

I'm also thinking back to the 1960's when mirrors were mounted low on the dash. Wonder is some suction type mount on the dash might work: https://www.amazon.com/dp/B0BHN7DGL6/?coliid=I1GD4822C34N25&colid=1MVFPUSOG3HL5&ref_=list_c_wl_lv_ov_lig_dp_it&th=1 if not on the dash, then maybe to the...

Being 6'-'5" tall, with a long torso and a senior citizen, I can see from these posts that most average size people just don't understand some of the difficulties we tall people must endure. Electric drivers seat is already lowered to its lowest position. No, you can't just recline the seat...

If you still have this speaker for sale I'd like to buy it. Shipping is to Rhode Island. Can do email paypal or send check. gary

I have two CDT 5" Braxials from a previous project. These are the ones that incorporate a 1" silk tweeter on a bracket over the 5" cone with seperate crossover electronics. I'd like to put them in the front doors. Do you know if the signal going to the door speaker is 'full' range, or is the...

Would the Dayton speaker benefit from a low pass filter? Dayton has one that blocks frequencies above 3.5K. I don't know if the B&O system has its own filtering capability, and I only know the basics about speakers in general, but is it beneficial to block the higher frequencies from going to...

TangBand makes a low profile 6.5" sub. Would this solve some of the clearance issues, ie, use a thin adapter plate and this sub but still have clearance behind the rear seat? https://loudspeakerdatabase.com/TangBand/W6-2253S