This is really a personal decision, based on where you'll be driving and how much. If you want top performance for those muddy back roads and soggy fields, you'll want an off-road all terrain tire, like the Falken AT3W that you had before....except that they don't make them in a 55 series tire...
Absolutely. Surge brakes are clearly inferior, but they make it safe (enough) for people to tow with a 4 pin connector. Since I have the 4k tow package and 7 pin connector, the first question I ask is, do you have one with electric brakes?
š¤£
Congrats! My mom got hers done last year and she loves it. She says āI found dirt in places in the house that I didnāt know were dirty for years.ā
š¤£
Guess it helps when you can see clearly.
you can see this has HVAC knobs, which means itās a 22-24. You can also see the screen has digital HVAC controls, which means itās a OEM screen out of a ā25, not an aftermarket solution
Ok. Itās most likely because youāre not used to electronic parking brakes.
The electronic parking brake can automatically set itself. It is programmed to self deploy if you park on a slope, if you shut it off while it is still in Drive, if you shift to park with inadequate pressure on the brake...
Yeah, I donāt get that problem. On the front, I wear down the outside edge faster from cornering hard. On the rears, I wear down the inside edge faster from the -0.8 degree camber and doing a lot of acceleration and braking. By running the pressure at 37-38 psi, Iām basically at factory spec of...
Itās obvious to think that the clunk is happening when the RDU engages when slowing to 13 mph. However, since you had your RDU replaced and it is still making the clunk, then the next obvious place to look is the rear prop shaft. The prop shaft, like the rear differential gears, are not spinning...
When the parking brake is on, if you bump the throttle, it will release the parking brake, but there is a delay. So if you blip the throttle and it doesnāt initially move, then drops back to an idle, then starts to creep because it shut off the P brake, it is operating normally and working as...
I just leave it alone. Been running 38-39 psi all summer. Now that itās colder, itās down to about 35, which is still fine for colder and wetter weather.
Agreed as well. I lived in Washington for 15 years, where itās legal to have studded tires. I had a 2wd Ranger. It was helpless on snow. Then I got studded tires and 500 lbs of sand bags for the bed and it would climb 20% grades on snow and ice.
I had no idea. Is this common in your area? I just googled and my local city does not. But if I travel 60 miles, the nearest library that does have 3D printing only does PLA printing and they only allow the use of their own filament.
Where I live, no one runs dedicated snow tires because there is no upside here. Only down sides like poor mud performance, poor sand performance, poor onroad handling, and excessive tire wear.
But a lot of us do run 3PMSF all terrain tires because we do occasionally head up to the mountains for...
Youāve already pointed out the major benefits of this item. But here are some additional benefits:
1) gives you a hobby project to occupy your free time. Then gives you even more hobby project time when the item doesnāt fit out of the box and requires you to figure out modifications to make it...
I went into the medical field in the late 90ās and every last bit of it had already been converted to metric.
Something about patient safety and mixing units.
Like when a medication dose is supposed to be 1.2 mg per kg of body weight, but the patients body weight is listed in lbs, but the...
I forget his handle, but the Dodge Ram guy, isnāt he the one that was aggro, like he was āroid raging and threatening bodily harm to other forum members that disagreed with him?
Was that real Maverick? Heās the only person I have on my ignore list. Just checked his status and says he was banned 7/25. So I had no idea he was banned or what for.
I put him on ignore because every technical issue was a pissing contest with him. Someone would say something and he would...