Search results

I'm sure just about any component speakers would be an improvement over stock. Don't have to chose these. I put sound deadener on the inside door skins, and any other places I found a rattle. If that was too thick, I used tesa tape. Door speakers and tweeters...

Yes... Black and red connect to the sub.

There's not much space to work with, and I do not know if an 8" would fit or if the amp can handle an 8". But if it works I would love to know. Inside the sub a harness plugs directly into the speaker. That harness couples perfectly and is an exact match to the extra harness the Maverick came...

I guess it depends on what you want. I didn't want a large enclosure or an obnoxious sub. Been there, done that. If that's your cup of tea then go for it. Like I said, this is perfect for "me"and it is "balanced" incredibly well with the other speakers. It's truly better than I expected. And the...

Its perfect for the spacing behind the seat, not sure if it would clear the magnet. I was going to try this https://www.ebay.com/itm/166186043742?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ca2kHvTPSrG&sssrc=4429486&ssuid=MZg04_usTYG&var=&widget_ver=artemis&media=COPY

Yeah I noticed those on Amazon. I needed to step it out a little too so the magnet would clear the enclosure, and not change the spacing between the back of the seat and the sub. 3/4 inch kept it as close to original B&O design as I could get. It's about 1/4 inch taller than original sub. I also...

I worked in an R&D lab for many years. I learned a lot from reading this forum. I just didn't register to post until I had something of value to say. Also read a lot from other forums, manufacturers data sheets, my own metrics, trial and error,... Etc. I was going to build a custom enclosure if...

Correct. And It cranks

I had some cabinet grade hardwood 3/4 inch plywood laying around so I used that.

So, I went through this elaborate breakdown of my B&O system upgrade, installation, research, and results only to have it disappear before I could post it. Wasted a couple hours. Not doing that again so here's a quick rundown of what I did. I had a bad door woofer, so rather than have the...