Orange console inserts and Plasti Dip

[Cheesehead]

There probably has been some threads on this, but though it might be best to post some comparison pics.

I bought some FORD all weather Maverick floormats from a boneyard and got a few orange inserts in the process so after seeing some comments on painting them with Plasti Dip thought I would try it out since I have some extras.

Plasti Dip spray paint is gunmetal. Did 3-4 coats and did not sand in between. I did thoroughly wash and rinse the orange inserts and then wiped them down with rubbing alcohol. After drying did the 3-4 coats about 35 minutes apart.

Here ya go!

Sponsored

 

[skyhawk]

Thanks for sharing! Where is a good place to get Plasticip (Lowes, Autozone?) and what does a can cost?

 

[Cheesehead]

Thanks for sharing! Where is a good place to get Plasticip (Lowes, Autozone?) and what does a can cost?

I got it at Menards and I believe it was $6.99 a can.

 

[Nw_adventure]

Plastic Dip- Orange Huggar color is almost a perfect match for those looking to add orange and not take away - lol Did my trays and cupholder insert.

 

[Dmthomp32]

That’s interesting! Thanks for sharing OP. I wonder how well Plasti-Dip adheres to 3D printed objects? I’m assuming well based upon the name! I’ll have to see if I can find some locally.

 

[Mdmac]

There probably has been some threads on this, but though it might be best to post some comparison pics.

I bought some FORD all weather Maverick floormats from a boneyard and got a few orange inserts in the process so after seeing some comments on painting them with Plasti Dip thought I would try it out since I have some extras.

Plasti Dip spray paint is gunmetal. Did 3-4 coats and did not sand in between. I did thoroughly wash and rinse the orange inserts and then wiped them down with rubbing alcohol. After drying did the 3-4 coats about 35 minutes apart.

Here ya go!

That's exactly what I want to do to mine, was it a pretty simple process? Looks better than the Orange

 

[Cheesehead]

Yes, just follow the directions on the can and clean inserts first.

Sponsored