Sold: Indiana 2.0" & 1.25" Wheel Spacers

[Jtitzer56]

Bought them to make the 21" Edge Sport wheels fit flush with EGR Rugged fender Fender flares. Had some issues with the shop color matching the fender flares and gave up on the whole thing.

Two 1.25" spacers for the back and two 2.0" spacers for the front. They are hub centric and come with all the lug nuts.

$100 shipped and if you're local to southern Indiana and want to pick them up, I'll throw in a set of EGR fender flares for free. They'll probably need painted because they are close to velocity blue but pretty far off.

Sponsored

 

[danmalx]

What brand spacers are these?

 

[Jtitzer56]

What brand spacers are these?

I honestly do not know, I bought them used from someone local and didn't ask. But I'm guessing at least the black ones are no name eBay one's. The black ones have a number stamped on them, I'm not sure about the silver ones but I'll check when I get home from work.

 

[Jtitzer56]

What brand spacers are these?

I was able to find part numbers on both sets.

The black set is 5425-5425b8-WC, they come up as a set of lugnut guys spacers. https://lugnutguys.com/products/wheel-spacers-5x4-25-bronco-sport-1-25-thick-14x1-5-studs

The silver set is 5425463450B they come up as a set of CustomMadeOnly(eBay) spacers. https://customadeonly.com/products/...elar-f-pace-e-pace-i-pace-4pcs-63-4mm-m14x1-5

 

[danmalx]

Sorry for not getting back to you. I had notifications turned off. Do you still have these available?

 

[Jtitzer56]

Sorry for not getting back to you. I had notifications turned off. Do you still have these available?

Yeah, I still have them.

 

[danmalx]

Yeah, I still have them.

I noticed a bit of wear on one of the pictures. Would you happen to have any pictures of the fitment?

 

[Jtitzer56]

I noticed a bit of wear on one of the pictures. Would you happen to have any pictures of the fitment?

Yeah, the silver set does have some wear, pitting, and dings. I don't have any pictures of the fitment but I can take some when I get my truck back from the shop.

 

[danmalx]

You're good. So long as they fit well and you didn't have any issues, I might be interested. I'll take some measurements tomorrow and see if that offset is something that fits with the look I'm going for. I know I want to do 2" in the rear but I was initially thinking 1.5 up front.

Sponsored