Search results

Hopkins Towing Solutions 55999 Universal Towed Vehicle Wiring Kit, Isolates Towed Vehicle from Motorhome and 56468 4 Pin Trailer Wiring Harness for 2021-2024 Ford Bronco with LED Taillights, Vehicle-Side Flat Tow Hitch Wiring for Powering Trailer Taillights(*Note: The connectors for the 22-24...

It’s in the TCM (AS Built) I just need the coding

So it sounds like you’re saying there’s two separate modules in that case how do I configure the hotspot to stay powered on at all times? I want to be able to use the hotspot for my dash cam for live notifications, for my iPad and laptop without the engine being turned on.

I am currently signed up with AT&T Auto internet service and I have configured the wifi, the network is there, as long as the vehicle is on, but when I turn the vehicle off the network goes away. So there has to be a parameter that allows for Ford Pass to still use the modem for Ford monitoring...

my2025 ford maverick where in forscan can I adjust the power settings so that the onboard modem stays powered on when the vehicle has been turned off?

Attach a picture

I use a blue ox tow bar with a roadmaster baseplate, RVIbrake3 for the auxiliary brake,towed charging system, remote breakaway and tpms all works in harmony. I plan on upgrading to the roadmaster nighthawk as the lights that are integrated into the arms is a nice feature when traveling at night...

Just run the positive to the jump post under the hood and the negative to any factory ground.

I am sure it helps support the deflection of the top of the shock towers, but it would be even more effective if it also attached to the firewall.

No sir that was a custom one I made. I did not want to cut the OE connectors. It’s a Hopkins universal kit with Ford OE connectors

I disabled the powerpoint timeout, tested it with a ring camera to ensure that my aux brake will always have power.

This is all I found about the 15min wait time: 2025 Ford Maverick Hybrid what is the purpose of waiting 15 minutes when turning off tow mode The purpose of waiting 15 minutes when turning off tow mode on the 2025 Ford Maverick Hybrid is to ensure that the vehicle is safe to operate. This...

Confirming that a 5/16 x 18 nut does in fact work on the under the hood positive terminal on a 2025.

Test tow today, all is well. For those using the RVI brake 3 for your auxiliary brake make sure your settings are set for active I tested with pressure set to 5psi and 10psi, I left it at 10psi. Charging was working as normal

FYI: on the 2025 In forscan there is an option to disable the powerpoint timeout in the BCM. The is also the option to set the desired time, the default is 2700 seconds.

Coyote V8 nah, more like Godzilla 7.3 Supercharged w/6sp, then I could still 4 down flat tow it

So the rear is truely independent and the ride would be better

That is what I was thinking, I took some shots of my under carriage and there are some unused threaded holes, I just have to get under an AWD to see where exactly the mounts are, I am finding a few of the subframes on ebay

Starting to compile a list of parts needed to Convert from rear I-Beam axle rear suspension to independent rear suspension, has anyone done this?

Toad harness is done, no need to butcher a factory harness, to splice in diodes