Search results

It doesn’t have to be from a 25 for this part, I think any Escape or Lincoln Corsair with a full digital will work since you only care about the plastic part. So the cheapest one that doesn’t look scratched up would fit the bill. car-part.com and lkq are good sources, too, though a pain for part...

@rugedraw I'm talking about this bottom black plastic part. I don't think you can buy the piece separately, but one from an Escape cluster would swap over). All plastic one is my old 22 cluster which is similar to a 25, silver aluminum one is from a digital Escape cluster (though it's got an...

I think the biggest annoyance I have with the Wolfbox (using the OEM bracket) is that the g900 tripro is huge. I wish the bracket arm was a little longer, or the software allowed flipping the mirror so it could be pushed up higher. Even using some 90 degree USB c extensions to push it up as high...

The Maverick speedometers all have a different front cover than the fully digital ones, so it’s not a straight swap, unfortunately. They all have a mostly plastic body (including 25, I tried one for fun on my 22 and it’s not compatible) and don’t transfer. Digital speedometers have a fully metal...

I do kinda wish the red was a little brighter, but looks cool. I didn’t see this anywhere else and it’s a little thing, but hazards flash solid red where the turn signals light up, functions look great overall.

I'm not sure it's worth the split cost, but the HRG lift kit for the FWD hybrid matches pretty well with the Rough Country 2-inch loaded struts (501147) if you're not going to tow, since it's pretty much level. I was getting a clunk from the front end and needed new struts anyway, figured I...

Couple more observations. The mpg range for the real-time monitor only goes to 40, wonder if that can be changed to 60? Edit: Somehow I have? Maybe picking full hybrid electric vehicle? I didn't change anything else in Forscan that should have been relevant 🤔 The post-trip summary doesn’t...

Mav, as long as your donor has lower you can update in Forscan. The Explorer had ~33k

I wouldn’t call my screwing around a great success, but I’ve finally got the swap done. I’ve also still got the newer Escape cluster set aside, so maybe if I’m bored, I’ll revisit that, but a 2022 Explorer Hybrid cluster is perfect, and everything looks to work!

I was looking around at this again for me and remembered the 25 Mavs use encryption across modules. I doubt you'd be able to just swap one, it's probably going to need a PMI via FDRS, likely not just a simple swap with Forscan, sorry.

That wasn't my diagram, that was from Bobert47 earlier in the thread :) But that pink square is just the splice between the green DU2Z-14474-DA wiring and the DD wiring. The green wire gets added in to the harness plugged into the passenger footwell area, which is what is shown in the first post...

Was the digital speedometer available on the Bronco Sport prior to 2025? I didn't think it was, and a 25 BS is likely to have similar issues to what I've shared with the 2024 Escape and 2025 Maverick clusters. Edit: Sorry I didn't see you had a 2025. Seems probable it might be ok, but you may...

Just for fun, I've tried a 2025 Maverick cluster, and that seems even worse than the 24 Escape. I get a similar “Stop safely now”, and turns out the Ford app was also triggering a High Voltage Battery Warning for both clusters (I was signed out of the app for some reason when I was messing with...

Yeah, I'm not sure what to think here. I'd be okay associating it with the missing communication, but it's weird that I don't have any other codes to correlate since those are "bigger" warnings to throw. I figured it would be kinda similar to the earlier cluster or Sync 4 swap, where it's...

Has anyone done this with a 2023+ cluster with the slightly newer UI style? I swapped one in from a 2423 Escape Hybrid to my 22 hybrid and it’s definitely not happy. Writing IPC from either my backup or downloading factory complains about a different number of blocks. Going to try taking an...

Hi all, was hoping to get a little help/sanity check. I've added in my Diode Dynamics lights, and I'm running into something similar to this and not sure what's up/am losing my mind a bit. This was a good sanity check since it matches what I'm doing (except for the blue wire for backlight as I'm...

Hey, for any of you folks who have installed any sort of lift kit by yourself or have any knowledge about this. I'd assume this would be mostly applicable compared to any model except the Tremor, since this is the front end where it's sorta the same. I installed the HRG 1.5" lift kit for my fwd...

Could see if youtube would take it down with a DMCA request at https://support.google.com/youtube/answer/2807622?hl=en since they're using something you created without permission. As promised, here's what my mounting looks like. In daylight (or maybe after the excitement), I'm a little less...

I had picked up a 13.2 off LKQ originally, but I couldn’t see how you’d mount that without it sticking out or fitting weird. Props to the others who made it look good, I’m content with a slightly smaller screen.

I didn’t, but I’ll pop that top cover off tomorrow and snap a picture of it!