Search results

It worked!!! Thanks so much for your guidance i actually couldn’t have done it without you!

well the pig tail is from the harness that the guy made it’s spliced into the front t wireing.

Okay I didn’t do it your way but I was able to check it and it does seem like two pins are flipped at the 4 pin square plug would it be wrong for me to just flip them at the square plug ?

This sound com is there any way you can put this in simpler audio noob terms lmao. I kinda only kinda know electrical hence why I got a pre made harness that is now becoming a nightmare lol. Thanks so much for you help btw I would have never been able to find out any of this.

If i leave it centered no sub output i move it front left or front right sub comes on.

How does one do this with out it sounding to far front or left or right for me I have to put it all the way front and to the ether left or right for sub to come on.

I put it all the way to the front and put it to the far left and right and it definitely goes on what does this mean?

Yeah on the 500.1 when I do the gain match I can’t get it to flash at all.

Okay co Okay I will do this. This doesn’t have anything to do with the sub tho or do you think this will fix it ?

here’s what the sub looks like it’s rough right now the box isn’t totally done just put it in to see if everything would work and it didn’t so once it works I’ll finish the box to my liking lol

I did the 200.4 auto tune before I had the 500.1 installed could that be the problem. And how would you change the crossover setting? Only thing I messed with on the 200.4 is gain

So the sub is rated for 200rms and a max of 400rms. Yes so that’s my biggest concern when I go through the process with the tuneing it will never flash for the gain match I can turn the gain all the way up and nothing it’s really odd. I will take a picture of the sub now.

200.4 is also getting power from the battery just smaller gauge wire and fuse the 200.4 output is fine works really good dont even have to mess with gain or it gets to loud.

I have it powered to the battery with 8 ga wire from a kicker kit. Maybe the ground I put it to is messed up but I had checked it with a meter and it was fine maybe I will do the sheet metal screw tho. Check my new post for the pictures.

Here is my settings now with still super low bass Remote knob is all the way up as well here is the ground Here is my power wire coming from the battery it says I’m getting 14v and the speaker wire going to the amp. FYI I’m a noob to this audio stuff sorry if I sound slow lol

I have to max everything out to get any noise-low noise. Shouldn’t I be able to just do the gain match setup and it work it Dosent even wanna do that. Do I have to mess with any of the the other settings before I gain match?

Here’s pics I’m gonna send some more soon. First pic is the settings back to “stock” and second is where it meets to the harness in the front.

I tried both input levels and the gain match still Dosent work. I had it connected but took it out to see if it would make a difference.

Tried this still nothing