Search results

You have to remove the entire front bumper support which is 8 nuts and 2 bolts after you remove the headlamps. Also disconnect MAP sensor from Passenger side Intercooler hose before disconnecting intercooler hoses. Make sure to unclip the hood release cable beforehand from top of shroud/shutter...

I believe the Ford OEM hard tri-fold is the BakFlip G2 model. You should be able to buy replacement rubber side pieces for $40 from RealTruck. https://realtruck.com/p/bak-replacement-cover-seals/

How do these measure up thickness wise? I found these also to try from Amazon: MECCANIXITY 5 Pcs 304 Stainless Steel M12 Flat Washers 13mm ID, 30mm OD, 3mm Thick. Bought a few paks (4) and kept the ones that measured out to 3mm exactly with a digital caliper. Not quite Grade 8 (800MPa), but...

I also purchased a pair of calipers with those same part numbers off ebay recently. LJ9C-2010-NND RF LJ9C-2011-NND LF

Yeah I have tried ordering a few times over the last month, every time cancelled within a few hours. When I called Ford initially I was told out of stock but also told flagged to not ship to CA. I have a couple case numbers CXH08573295-24Y4N6 and CXH08575950-X3Q4T2.

I tried to order one from Ford Racing/Performance earlier today and my order was canceled. Saying it was not legal to ship to California even thou I see everywhere its 50-state approved with CARB EO#: D-759-32.

From these photos (Top Non-PE/no decal) and (Bottom PE w/ decal) there is a inside radius and overall length difference between the LJ9Z (Non-PE) and the LK9Z (PE) Calipers! The LJ9Z Calipers for the 362mm Rotors weigh 11.45lbs and for the LK9Z Calipers for the 385mm Rotors weigh 11.7lbs. Also...

I went looking for new Calipers for the Non Performance Pkg from various Ford OEM's and Rock Auto and found these parts numbers for 2021 to 2024 Mach-E's. Note any part that begins with LJxx is for the Non Performance Pkg with 362mm Rotors. LKxx are for the Performance Pkg with 385mm Rotors...

I'm confused by your photos, that looks just like my AFE Power Rebel exhaust that I also have, that I love and sounds absolutely awesome with no drone just like your sound clip!! Are you saying you replaced the AFE Power Rebel Resonator with a 14" Aero AR25 Resonator pictured below? Do you have...

I use "FTE-Tire Size Calculator - Forscan V5" to set my circumference in Forscan. Make a copy first to save in your Google My Drive. Generally this works for tires that don't go over 29" in circumference. For instance on my truck I set my Forscan value to 2240 that got from the FTE Calculator...

I originally had the old version MRT Struts/Brackets with using the Jeep hood spring trick. Called MRT and ordered only the new version Brackets since I already bought new struts late last year. Install them and I also was disappointed that I lost about 4" or so of hood height. Also contacted...

For HVAC Blank Screen: In APIM (Simple Mode) - Disable "Climate Auto Seats", also Enable "Heated Steering Wheel Icon" and set "Seat Button Icons" to "Heated Seats" if not already. For Lariats to change to Square/Rectangle American Traffic Signs from round European and remove Ghost or Passing...

Yes the Kia auto-dimming mirrors do have Home Links (2) plus a compass! https://www.mavericktruckclub.com/forum/threads/kia-mirror-with-auto-dimming-compass-and-homelink-install.28803/ Installation with harness:

I bought this camera almost 2 years ago and it's has been great! I have the model A that wires directly to the OBD II port, it was a easy install! Here's the actual link to what I bought back in May of 2024: https://a.co/d/06uyPuJJ

I installed this Fitcamx 4K Dash Cam on my 2023 Maverick. Integrated OEM Look, Mounts to rear view mirror mount, 2160P UHD Video, Built-in WiFi & APP, Loop Recording, G-Sensor, Easy to Install, Comes with 64GB Card. They also have a Front & Rear Version. https://a.co/d/01TXmJI8

Here's a YT Video below that shows you. First extend your steering wheel out closest to you, then flip the low cluster trim piece to get to two bottom 7 mm bolts. Then pull back on the dash cluster bezel by pulling on the top forward piece, being careful about the right side clip. Then remove...

Ford Pass is of no concern, so I would forgetaboutit! No disabling of any modules or disconnecting from Ford Pass. I've done two Cluster exchanges, (1st was a Escape, 2nd a Explorer) without issues concerning Ford Pass. Not that I even bother to look at my Ford Pass app when doing these Cluster...

This is the relearn tool I use that works with the either the Manual or Forscan Relearn methods: https://a.co/d/0h0V8l7m

MRT has redesigned them to be even better! https://www.mavericktruckclub.com/forum/threads/meet-the-redesigned-latch-safe-maverick-hood-strut-kit-by-mrt.78368/

Original struts started wearing out after 3 years. I open and close my hood a lot!