It is screwed to the rear bracket. I ran a bolts under the amp then bolted the amp board to the bracket then mounted the amps over it so you cannot see it, nice and clean.
Make sure you use a flush bit to get your bolt head flush.
Each of my amps have a 50 amp fuse rating. I am running a 100 amp ANL inline fuse. I have had no issues with powering this set-up. I did signal sensing for power turn on but the way the hybrid works it takes way to long for the amps to power down and they randomly will turn back on with how the...
Ok all the Keyloc does is clean up the signal coming from the factory HU there is no external DSP software to tune it with.
JL offers the Fix 82 and Fix 86 that clean up the audio signal from your factory hu like the Keyloc but that offer some additional flexibility and tuning via the TUN...
I have not seen any of the normal sources release a solution for the Maverick yet. I have been checking weekly to see if anything pops up but nothing as of yet.
1. You never needed a LOC as your amp accepts high level inputs, LOC can introduce noise.
2. If you have noise it is generally a faulty ground
3. Your amp does not have signal sensing, so you they have wired in a remote wire somewhere.
4. A DSP is not going to stop noise
5. A DSP is a great...
If the leaks are small just get duraglass or kitty hair and seal them up from the inside. If it is due to the fiberglass being to thin then you are going to have to layer more fiberglass.
I have mine sitting in a box still due to this. Hoping they would get on this issue quickly but it appears they are still dragging their feet. In limbo on sending them back and going H&R. This sucks as I would like to lower my truck but I guess I will be waiting.
Thanks for your hard work to...
The sound stage is pretty good. You do have reflections like anything mounted on in the pillars. I am happy with pods we built in about 4 hours complete with paint. Pillars may sound better as long as you have the driver and passenger pillars pointed directly at each other.
The only way on top...
The top and port side is 3/4 MDF, the port is made from 1/2 MDF. I will have to get some pics of how to remove bottom seat.
Quick how to.
There are bolts on the side and then you have to remove the wire cord barrel.