Search results

I'll update if I find anything. It doesn't feel like a shimmy or a wiggle (to me, those are specific to lateral motion and this feels more like passing thru a breathing mode resonance on a prop shaft). I just got my truck back from the dealership today after they just did the recall fixes for...

15.5k.

I have been searching thru the forum to try and see if this issue has been mentioned. I have read plenty of issues where there is a shaking at speed or when going in and out of drive modes, but haven't found one that explains what I am experiencing. Initial Conditions: Ambient temps are cold...

Does anyone have a link or information on a better cellular antenna for the Maverick? I am not sure if the sharkfin on the roof is the cellular antenna (as well as the standard radio antenna). I've seen the posts for the stubby antenna. I have good cell service where I live and really don't...

That sounds about right. My bricks draw 2.5A - 3A each at 120V, which is 300W - 350W. Input voltage being 48V would put it right around 7.5A max. That would put me at 30A for a hardline to the 12V system. It may be better to just put a bigger inverter in, since I would need to have a boost...

It is a PowerSplit, so there is no true neutral. The powertrain has to be powered up. This is also Ford's 4th generation of this hybrid powertrain.

I am not sure what the voltage is on the solar input ports. The main charging ports are the same as the solar ports. The power bricks put out 48V to charge the pack. My solar panels put out 20V, and the car adapter is obviously 12V, so there is some kind of voltage regulator in the pack. I might...

Yup, but the DC adaptor only draws something like 100W. I need to check if the Jackery will draw from the DC plug and the regular charging ports. It's not ideal, but I could use one of the regular bricks to draw 300W - 350W off the vehicle's AC inverter and plug into the DC outlet too. That...

I need to look into this. I have a Jackery battery bank that I use for camping. The charging bricks say on them that they can pull 5A. I put a kill-a-watt on one of them to see what was being drawn and the load was 2.5A - 3.0A, so well within the loading for the vehicle. If I wanted to charge...

I wanted higher-power usb ports for charging electronics in my truck and didn't want to buy a high-power 12V accessory since I have a bunch of AC chargers that provide high-power output. I didn't want to worry about a large charging brick pulling on the outlet and wearing out the contacts. I...

This post shows exactly how I would want the loading to work: https://www.mavericktruckclub.com/forum/threads/best-ladder-rack-rack-it-installed.19650/ It looks like the Yakima HD bed rails might be a good solution if they extend high enough to be inline with roof rails. I could then install...

I built a full size TARDIS years ago for taking to events. The whole thing breaks down into parts and could be flat-packed if I had an 8-foot bed. I have been looking for a rack solution that would allow me to flat-pack the TARDIS on the roof. The longest parts are the corner posts, which come...