Search results

Mine acts the same way...screen will go to calm screen on first press, then off on second press, but audio (radio or carplay) continue to play in the background no matter display status. I never use the button, so that one was new to me. I would think it has to do with how the button interfaces...

I See what you mean here, I noticed the 2025 Mavs don't have physical controls and went the way of the 2023+ Escapes. Someone with a 2025 Mav would have to check, but I don't think the two wiring harness plugs that would carry power and signal from a climate control unit will be there. This...

That is interesting! I would think that there must be a different wiring harness that isn't present in the non-SYNC Mavs like you thought connecting the ACM to TCU since there isn't a factory APIM. FordPass seems to be ok through battery disconnects and the button combo to force restart SYNC...

Not counting the hardware and aluminum (which I already had on hand) or the FORscan license, less than $650 if you find a good price on APIM. Not too bad really! ~$240= 2023 Ford Escape APIM SYNC4 (P/N: PJ6T-14G670-BFP) ~$300= 2022 Ford Transit 12in display w/HOUSING (P/N: NK4T-18B955-FC3UAW)...

HAHA, I may have gotten excited when it was all working and forgot to take final pics lol. I'll post some later today. Thanks!!

After collecting information from lots of people on this thread (especially Billzilla15, 801Maverick801, pantera156, yeahiguessman, and Redneck Garage’s youtube videos…thank you everyone!!), I am happy to report that I now have a fully functional, all knobs and buttons working, no audio issues...

Looks like a nice and straightforward solution! Looks like about 1in x 1/8in aluminum flat...did you bend/profile it in a vise?

That should be the GPS antenna connection I think, but someone else please confirm/dispute. Appreciate all the info on your install thus far!!

You were spot on! I was looking at the pin diagram from the back/wire-in side and it was flipped. Everything works perfectly and as planned now, with the VB Positive + Ground + BCM Pin#6!!! Thank you so much for your help, you saved me another long day in this heat trying to troubleshoot! I had...

Hi again all! I got my lights installed today and thought I wired everything up according to my understanding from the write-up, but now the fog lights stay on all the time. I drew the diagram attached and this is how I have wired things. The BCM #6 pin is wired to the "S" Switch Input Wire on...

That could be an option, I hadn't considered that thanks! I was hoping to use the "Wilton ATV All-Terrain Vise, 6" Jaw Width, 5-3/4" Max Jaw Opening, 5" Throat (10010) from Amazon and it juuust touchs the tailgate when it is down. If the tailgate where to be let down with the vise on it would...

Ah ok that makes a lot more sense, thank you for the swift reply and assist!!

I also have this project planned! I just got my f150 hybrid headlight switch in and I'm waiting for the DD kit to ship. I do have one (maybe silly) question....where is the green wire (DU2Z-14474-DA) connecting other than the BCM? That part is a little unclear from the image and from what I've...

This is what I also have planned! I just got my f150 hybrid headlight switch in and I'm waiting for the DD kit to ship. I do have one (maybe silly) question....where is the green wire (DU2Z-14474-DA) connecting other than the BCM?

Anyone have a recommendations for a trailer hitch vise that doesn't hit the tailgate when it's down?