Search results

Thanks Brad!

HI Brad: Just removed my 3rd failed RVi battery charger (this one melted where the wires go in and out of it - piece of junk in my experience with 3 separate units) and installed a direct line with an in-line diode breaker and fuse. Do you have a link on the voltage monitor you used. I now have...

Florida to PEI and back with many side trips, 4,800 miles, 44 days, 21 stops, 14 states, all Blue Ox. Not a single problem.

I purchased a Curt system that should be here today and will install and provide pictures of the final result. Now trying to see what to do with the license plate as carrier has ramp attached at rear. With bike covered, can't see lights or plate. Thought of putting plate in rear window but tint...

Found the item on my panel in front of me and disabled rear parking assist. Thank you for the help!

I will check on that as well, thank you sir!

I will search the screens. Thanks a lot

I installed a single bike rack with ramp for my Lectric (photos will follow). With the bike mounted and covered, when backing up, the rear sensors go crazy thinking I’m going to hit something. Is there any way to temporarily disable this? I want it to work when there’s nothing on the hitch but...

Memory seat selector, passenger powered seat, auto-dimming rear-view mirror, rain-sensitive windshield wipers, better paint for the $495 extra I paid, a reliable 12v batter, in that order, for a top-of-the-line flagship model the Lariat was supposed to be (and yes, I knew all theses shortcomings...

Great photo op this morning.

Seems high compared to my full install in South Florida that included a new lower fascia on my 23, including an RVI battery keeper but may be reasonable where i you ou are and for a more recent model

The Patriot has feet you can adjust. Make sure you clamp the brake pedal top and bottom. Bring the seat forward until the actuator barely moves the pedal. Then hit set up and it should go through 5 cycles after which the green light is constant. Don’t forget to connect the electric disconnect...

Wow, wow, wow, wow, wow as Borat would say. Thanks so very much!

Thanks so much, I'll post pics as I go along.

Here’s mine: Car Tailgate Antenna Bracket... https://www.amazon.com/dp/B0C4DCHSH1?ref=ppx_pop_mob_ap_share Don’t forget to share how you got the coax into the cab!

Did you have to remove the rear passenger wheel and wheel cavity under cover to get the coax from where it goes from the bed into the wheel cavity and then to the cab or how did you thread that?

I have the same Mount and a similar antenna to yours. How did you route the coax from the bed into the cab? That’s all I need to complete my installation and not quite sure how to do it. Thank you very much.

Wow. Quite a job. Not sure up to preparing that harness. Thanks so much for your details!

Me too. 6,000+ towed miles to date. Setting to 2 on controller for hybrid.

Do you have a thread with your experience with this solution, link to mirror, harness design, etc.?