Search results

I switched to these. Gave up on lasfit junk, they died in a month. I did go in forescan and turn off bulb outage, also trimmed down the bulb socket to accept 7443 type lamps. https://a.co/d/f4lrlgI the ALLA worked go too https://a.co/d/aaHrwOz dont get any with fans in them as they draw too...

Anything from OPT-7 that’s labeled PARALUX means it’s 2 pieces , just fyi. This one is not https://a.co/d/2PpfGJY I bent it to fit the curve on the top of the tailgate

I went with the OPT-7 dual row . It does the animation on start up. Did wire it direct to the tail lights. It is sealed in epoxy and aluminum Chanel which can be bent as seen in my truck. The bottom LED that is chasing is a different bar. The OPT-7 is on top

Done that 100 watt CIG panel with a optima yellow top H5. Bye bye deep sleep

my 23 doesn’t have those, it uses radar on the corners. Must be a new system

The maverick uses sonar , not the IR ones your used to seeing. The 2 sonar ones are located behind the bumper at 45deg angles on the corner https://www.redlineautoparts.com/ford/2022-current-maverick/2022-2023-ford-maverick-passenger-side-blind-spot-radar-sensor-nz6z14c689a-mv002/

If your going to use the FENIEX or WHELEN, use the solid on option in the strobe patterns so your maverick does the flashing, the lamp just acts like a standard bulb .

That’s cute, but it’s a toy light. If you want to grab attention , only use CLASS 1 SAE rated as the toy lights have a very narrow beam to make them look bright at a certain angle. Also they tend to leak water in them too.

The ones in the XLT badge are FENIEX QUAD CANNONS. If you surface mount these you will need the cover for them or drill a 1” hole and hide them as they have a 120 deg spread. I wanted mine to stick out so people can see them as they approach. They have 3 modes too as well as 4 colors built in...

All the FENIEX are SAE CLASS 1 rated . These aren’t toys from china, made is Texas

Those are the new FENIEX QSM FLAT. They have 5 colors and 3 modes. I have my modes as solid amber for turn as mode 1/ mode 2 is solid blue and mode 3 is strobe green/amber. I ran some 18-6 wire thru the mirror and down thru the door and out the grommet to the front fender where I have it spliced...

Been there ,done that. Here is a link to the plastic square anchor on Amazon Rexka 30pcs Nylon Nuts for... https://www.amazon.com/dp/B09VZLRNJY?ref=ppx_pop_mob_ap_share

You mean like these🚨

LAS-QUIT , says it all🤬. Found some really bright ones so far and have lasted a year. Did go into forescan and disable the outage. I’ve went thru 3 sets of LAS-QUITS and gave up on them. If you go to hi-power ones with fans, it will kill the BCM on the brake modules. The front turns will take...

I installed a tail lite bar on top of my tailgate as I didn’t want to block the spare tire hole. OPT7 aluminum can be bent to fit, has really bright reverse lights and brake lights. Also made a hitch light from a FENIEX quad cannon. Has reverse mega bright and tapped the third brake light...

These have outlasted the LAS-QUIT junk, they would die in about 2 months. Currently using the DDM as they were slightly brighter than the ALLA, both do work. I did try the OSRAM too, just wasn’t bright at all. I’m sure it would last as they were built nice, just wasn’t bright.

I’ve been thru so many bulbs in the brake lights. I’ve found the super bright ones with fans don’t work when you use the turn signal and will kill the tail light function. I’ve found 2 brands that work great. I did go into forescan and shut off bulb outage or they will hyperflash on the dash...

Same with mine, been in the shop for 5 months waiting on a wire harness , this is the second time dealing with shift sys faults too. Would not come out of park. Never blew a fuse tho, first time they put new transmission in and lasted a year, next time it ended up being a corroded pins in the 40...

These are bright , ALLA on Amazon https://a.co/d/eStYy4L

You might be having 12volt battery issues, this will kill ford pass until it’s fixed. You will get a message on your phone saying it’s in deep sleep mode. Also the cell tower signal needs to be strong, I believe it’s a AT&T modem as there is no Verizon at my house and the app works every time...