Search results

Looks like you only need to remove all that plastic up top and the wipers if you want full clear access to the bolts on top. You can squeeze in there if you remove some clips and bolts and just pull that plastic piece that covers the top of the strut. Posted some videos of lift-kit install but...

Ok so lets look at what ILSAC GF-6A is: Now compare that information to Motorcraft: That requirement protects against LOW SPEED PRE-IGNITION (LSPI). These new oil standards are recently put in place because newer vehicle engines are going more toward using turbochargers. Ford WSS-M2C962-A1...

WE GOOD OR WHAT?

Man, when are they going to start making 6 quart jugs? All my vehicles take over 5 quarts to fill lol. Good deal, thanks for sharing OP. 6 quart case of that same exact Mobil One Advance Fuel Economy oil is $43.48 at Sam's Club.

I agree. Wipe that loctite clean and have clean threads to work with for a much easier install. Add fresh loctite to the threads if you want it secured. Once that nut starts spinning against the metal of the tailgate, it'll wear down grooves and the nut may have a hard time "settting" the...

If you're looking to go the cheap "ceramic" spray route, then Turtle Wax Hybrid Solutions is good and easy to use. People also recommend Technicians Choice TEC582. I personally use Dinowax Serum Boost. All the ceramic sprays seem to work good and easy to use. But yeah, it's not a true ceramic...

Recommend another nut to use in place of the OE nut? That looks pretty bad. I've seen stripped threads and that's one of the worse I've seen, like the shaft owed the nut money bad.

Rear armrest access hole. Installation tip: Had a hard time finding a place to hook those two hooks underneath the seat. There's a lot of plastic under there. The hooks are for the flap on the bottom of the backrest cover. If you hook onto the upper side rails it'll pull the flap flat. If...

Rear fold down armrest doesn't have an additional piece to cover it separately. It is uncovered and you unzip 2 zippers to have access to the armrest to fold down. It's just a flap that covers the rear armrest when folded up. It's the only negative but adding that piece would make the rear cover...

I agree on keeping it simple. I want a piece that looks like the OEM part, but no trim markings, with small strip of bright amber LEDS. Nothing fancy.

Picture of the velcro straps not holding well and just coming off. If you rough up that backrest fabric so that it gets a little fuzzy, the velcro hooks will "hold" onto it. Not a solid hold but just enough to hold the cover on. Going to glue some pieces of felt on there for the velcro to secure...

He changes looks like he changes socks. I wish I lived near him so I can pick up his old parts lol.

They have a good return policy. They even refunded me shipping to return since they were defective.

Same here. EGR in-channel visors and the windows got stuck. Had to push down on window to help get unstuck. Too much binding so I returned it. Also, the visors looked weirdly brownish under direct sunlight. I think mine were defective. It didn't look good. You can crack the windows open and not...

Delivered yesterday and installed today. Install went smoothly if you watch the videos posted. Paper instructions are pretty much useless. White gloves included helped with install as my fingernails kept digging into the material when tucking cover into all the areas. An issue I ran into was...

Wondering if you can go into more detail here? Never had seat covers as they always look a bit sloppy even when first put on. These look great so far and fit looks spot on. Color looks good, not a jet dark black but like a matte black, matches the interior well.

Found a couple Mabett install videos on Youtube for the Bronco. Might be similar so might help ya along the way. Been looking at these videos to give me an idea on how to install when my seat covers come in.

Nice idea to integrate the cupholder and trash can in one unit. If that textured area was an opening for trash that would be good. Trash can looks a bit deep though and it might not fit properly in the FITS for people who have thicker rear floor mats that cover that center floor hump. The bottom...

They may have more available.

These look great! Ordered! Thank you for the discount. Hoping they fit and look just like in the picture. Usually don't get seat covers because they usually look a bit sloppy and I don't really need the extra protection. The fit on these look premium.