Search results

the original post provides scaling dimensions for the radio and temp knobs, not the shifter knob. The shifter creator says to downscale it in the description by 0.04%, which I did not do. If I did this, it would be even smaller. but yes, I very clearly followed the instructions and it doesn’t...

Haha mine was too small printing it from the file. Weird

Sorry to resurrect an old thread - but how does one take the rubber off the shifter to make this fit? Or is it just a case of printing again and rescaling? I assumed the rubber had to come off, but the dial shifter part I printed at regular scale doesn’t fit.

No lag change, valve starts in closed position as boost builds. Additional noise on throttle closing. It makes a woosh sound.

Thanks for this. That adds up. I got thinking about this because I added a VTA spacer to my diverter. With an auto transmission, you don't really lift the throttle the same way you do with the manual, so it's hilarious, because it just puffs like a bus does it's air brakes. Definitely not the...

Hey! If this is in the wrong place, feel free to move it - not a really good fit anywhere, but will require Forscan I assume. There's a fun thread in the focus forums about adding paddle shifters to a base focus by swapping wheels...

I didn’t take one but can confirm super easy. Hardest part is one hard to reach bolt. And the 30 minutes trying to see if you can shine the light down onto the skid plate after you drop it. Ask me how I know.

Gonna need a smaller socket. I tried 5mm because of the new bolts. and it came out from the top of the DV, not the bottom right?

About to install. What tool took off the old studs? Looks like it needs a socket but it’s not 5mm like the new one

Where do you get a Branco?

Canada. I guess they do, but I didn’t want to get hit with duty. We have a much lower “exemption” amount. I found a place here that has one and it’s on its way.

The site you linked doesn’t include part numbers and they can’t ship to me. Can you let me know if the part or packaging has a part #?

Sailboats for scale

On the other side of the argument, after working on turbo cars, owning turbo cars and driving turbo cars, I’ll be running Premium. Yes it’s more expensive but octane is important with forced induction. The other difference is detergents. At least here in Canada, the difference is significant

I’d say so. Enough that I’ll use them for service and they’re 1.5hr away

Did you buy the wei Did you get the wildpeaks separately? My fx4 came with the scorpions

I liked my JL until gas went crazy and it hydroplaned and got blown around a ton coming back from Montreal. Mind you, probably partially my fault lifting it and putting it on 35s. But it was the whole package reasoning that made me switch. 1. I thought I’d like off-roading. Turns out I...

As a product, the concept is amazing. A small truck that does most truck stuff. The design, inside and outside is cool. Initial quality is lower than I'm used to. (German cars and a JL Wrangler) - meaning some rough edges can be seen in the hard plastic dash parts at seams. The backseat takes...

Finally!! EB XLT Lux FX4 4K c360 w/moonroof Bedmat, all weather mats, tailgate lock. Tonneau and flaps on the way.

I 100% did. Thank you for your assistance in this trying time.