Search results

I have a similar Wolfbox camera. I like that it’s sorta hidden because it goes on top of the rear view mirror. I keep the screen off since it still records. The glare is sufficient for daytime reflections the app isn’t bad. I think it’s easy to navigate on the main screen. I’ve used it to...

Thanks for that info! as an update, I got everything fixed. Just waiting on tailgate letter inserts. I’m only out $200 for now. I’d be shocked if he ever pays up via subrogation, but that’s a Progressive issue

Awesome truck! we have basically the same vehicle! I did the Etsy letters, and they really popped nicely on the truck. Unfortunately, I got rear ended a few weeks ago; the body shop didn't replace the letters so another PITA thing for me to handle on Monday. I did the Bakflip MX4 cover. I...

appreciate the insight. I'm admittedly ignorant on the process outside the fact that I'm glad I have coverage for uninsured drivers.

that sucks. I feel the pain. I got rear ended this Monday by an uninsured individual. Luckily, I have coverage for that, and he's so far agreeing to pay that deductible, which is more generous than making him pay the estimate to replace the bumper and tailgate. luckily, no other issues.

Agree on deadening the floor. I've done sound deadening to the back wall, floor under the rear seat bins, and front passenger floor. My next spot is to do the driver side floor and go as far up as I can into the footwell. I also used Resonix FiberMat45 for the front passenger floor. That was a...

That’s perfect. I’m reading up on that ceramic now. Tinting the front side windows will be just enough if I do ceramic on the front. I’m just glad to have a reference with photos. Thanks!

Thanks for the specific references. I have the same color so I’ve been looking at how carbon gray would look. I’m on the fence about doing much tint on the front. I can do the tint waiver for MS so that isn’t a deterrent. I just want a clean look I’ve never had much tint in prior vehicles so...

I haven’t decided on drilling a hole or not. I have my wires tucked in at the side so not too many showing. I figured some would show either way so not point in drilling I haven’t done the gps yet. If I drop the headliner to sound deaden, I’ll likely add the GPS and move the camera outside like...

I’ve been slowly applying Resonix sound deadening tiles after I finally wired a Dashcam and did the bed lights. Now that I got the hang of popping out trim without any issues, it’s doable in bursts. So far, I’ve done sound deadening tiles. To the back wall, under the rear seat bins, and front...

I feel your pain. I ran a Dashcam front and back with hardwire. I struggled more with the fuse add ons than the trim. Worst trim piece for me was rear passenger next to seat back. I didn’t intend to pop it up when I was running the back camera. I also took up the trim rear underseat bin for...

So I tested continuity in all my fuses. They are fine. I'm wondering if the orientation of my micro2 tap placed in fuse 24 is the issue. From what I can tell in the above videos, the add a fuse should run downwards while the micro3 add a fuse runs vertically Is that how you oriented it? edit...

Thanks! I used that video, too. Never hurts to watch it again. I’ll make sure all fuses work too

I didn’t use the gps module. I figured if it would pull more power, which I’m obviously still working on as for the view with tint, I’ll try that out once I verify my wiring set up. I initially tried to set up the camera outside, but I struggled running the wire from there so I just ran it...

Yeah I’ll have to toy with it tomorrow. I’m using the wolf box wired hardwire kit. Their Amazon page suggests using 15-25A for accessory mode, but you and the video had accessory running at fuse 1. Back to the drawing board tomorrow

So I finally got all the wiring done. I tapped into fuses 1 and 24. No power going to the unit when I started the car. Swapped out the USB-C and used the cigarette lighter; it works. Did you have any such issues? I think my next step is to check fuses

Thanks for all your detailed steps on sound deadening. I'm slowly doing the same on my hybrid. when running some rear dashcam wires, I went ahead and pulled up the passenger side rear seat bin, but I noticed the back was held down by what appears to be a hex nut and bold. I couldn't scoot the...

sorry to revive an old post, but I figured it was easier than starting a new thread. did you sound deaden under the rear seat bins? I started removing the trim as I was running dashcam wires, and I got part of the passenger bing taken up. I got stuck at the very back part. It looks like the...

Thank you! I think the inside mount attempt will be easier to try. I don't plan on adding any tint to the rear window anwyays.

any chance you have camera pics from the inside view? I tried to run it outside under the bed light but called it quits today. I'm curious how the tint affets the image quality. Thanks for all your detailed pics!