Search results

Thanks for the quick reply. Think I'll go with this option.

This looks great! Any issues with securing and transporting both kayaks together? The link on Amazon only shows one kayak. :)

Have the same issue with the driver's side rattle. Re-installed it today so will see if it makes a difference. Also talking with EGR abut a solution.

How did you go about determining which wire is the reverse light wire? Thanks!

Picked mine up on Monday. Same color, BAP, etc. Love it! 10 months was worth the wait!

Just a follow-up in case anyone has a similar question in the future. I finally got through and spoke with someone at Lund. They told me that the hood protector needs to adhere directly to the paint of the hood. He told me that the 3M tape on the hood protector would not adhere properly to...

My MAV has the factory installed protective film on the hood and fenders. My wife bought me a Ford Lund hood protector for Father’s Day. Can I install the hood protector onto the protective film (since it won’t be in direct contact metal of the hood)? I’ve reached out to Lund on a couple of...

Any progress getting the Heads Up Display product to work on the Mac Hybrid? I still see the 'won't work" message on the F150LEDs website. Thanks!

I was wondering about this. I purchased the Curt wiring harness to install a Putco light bar (which I haven't done yet). The Curt directions have you running a cable all the way to the battery. Was wondering why you couldn't use the in-bed 12 volt supply instead. Is this the same Curt unit...

I'm adding a tailgate light bar as well using the Curt Wiring harness and a Putco Blade tailgate light bar. From this diagram, it looks like you tap / splice into the wire on the LEFT side tail light that is in position 3. Am I interpreting that properly? Thanks!

thanks for the insights!

This is the Curt harness. So one of these white wires? If so, how do you determine which one is for reverse (which one to splice in to)? Is there a wire schematic available? Thanks

Is this the WHITE wire on the Curt harness that the white backup wire on the Putco light needs to be spliced into? Thanks!

Can you describe the connections you made using the 12volt bed access point? Instead of running underneath the truck directly to the battery, that connection would be made directly 12volt supply in the bed. What about the second wire (on the Ford connector)? Does the ground attach there or...

Do you have any experience with the Putco clips that would allow for the installation of a 48” light bar blade? Would it be easy to temporarily pop the bar out of the clips so the spare tire access hole could be accessed and then snapped back into place after the spare tire is lowered? Was...

Quick question...did you use a dual fuse tap to allow both wires (dash cam and mirror) to access the fuse or did you splice / tap into the single fuse tap wire? Hope that makes sense.