Search results

There was a guy selling them with the cutout done for around the hitch, it’s the piece in the bumper cover if one doesn’t have a hitch, I got mine from dealership and cut it out myself after seeing it done on the forum here

I slid under and did some measuring and it seems both the filter and drain plug are in the same place as the ecoboost. Needed to cover up the large hole in the shield and then cut the access panels. I didn’t cut the shield pieces out completely, left part there and creased it to make “doors”

See if they have a universal bed mat, you could cut it down to fit? I did that with a bed rug I found on marketplace, worked perfect

I just got a FITS kit with some crossbars I bought from a member, and not really sure the quality is any better than the 3d printed options out there folks are putting out

I used plumbers putty, works great

Almost finished, waiting on thumb latches. Had to fill in the big hole Hoping this works until I get the 3d access panels printed

Had planned to cut access panels on shield under engine for oil changes. Wondering if filter and drain plug are in same location on both engines? I Have template for hole locations on the ecoboost motor?

Now I’m spooked to start cutting not knowing where the openings need to be on ecoboost vs hybrid ☹ gonna check the thingyverse file for the access panels to see

I have that saved, lol. But my shield looks different? Has a large square hole cut already? I have two thumb turn cam locks I’m hoping will work And I have hybrid. Cam locks won’t be here till Tuesday, I measured oil filter location, and it looks same as pic from thingyverse. My panel missing...

I just got back from oil change and left the engine shield off. Planning to cut out access to filter and drain plug areas, fold down the cut parts and use some catches to have panels for oil changes. Hoping this works

Now at 29, hybrid XLT at McDonald’s in Athens. Central Ohio tags

this works for me also...........

Have the steelies /tires scheduled to swap this Friday. Done, and new sensors calibrated before I got out of the parking lot of the garage

I had the 23E07 done at the end of September, along with 23E09. both were software updates. I'm still waiting on remedy for the one recall: Campaign/NHTSA# 23S27/23V380 Issue Date 2023-05-26

This one is on the marketplace here https://www.mavericktruckclub.com/forum/threads/xl-xlt-slightly-damaged-rear-bumper-cover-and-absorber.27106/

Dollar store trash can, FITS plug, and a couple machine screws works well

Not sure of purpose, but my 22 has it, and I used plumbers putty Under the tonneau cover there to prevent water getting in

here's a pic showing where it is on the tailgate

Only dumb question is the one that you don't ask...........my understanding is the Mcgard tailgate "lock" is an accessory or add on that can be purchased. (I bought one after getting my truck, just not from the dealership) In order to install it, the Ford OEM tailgate "hook" (that's what I call...

if it's me, I'd take the stuff to the parts department and return all of it, or at least the window deflectors (the in-channel aftermarket ones look better i.m.o.)