Search results

I've filled mine that way twice and haven't noticed any issues. But I do wonder why they say to fill it through the vent on top.

Probably not any you want to hear but you'll probably have to take it off and have someone weld another O2 sensor bung on it. I just finished switching out my Fast Mavericks catless downpipe for the CVF catted downpipe and it's O2 sensor is in the same spot but rotated down a little bit. I've...

No problem! I don't know about them fitting under the factory Maverick 18's, I only have the 21's right now. I know the base Mach-E comes with 18's and the smaller brakes.

Just the regular Mach-E brakes, they're the same as the Mach-E GT(non performance pack) brakes but they're silver instead of red. I went with used ones and those were a lot easier to find, then I painted them red. No special parts and the only issue I had was bleeding them but I think that was...

They haven't added anything that I know of and I haven't had any problems, so I haven't tried this. But the beta version of Forscan can update firmware and software so it might be able to.

Switch back to the tire size that was correct the same way you did, then go to the service options and toward the top there's one that'll say something like PCM relearn(might be ABS or TCM), run that. It pretty much just tells the other modules what you just programmed in the BCM. If you look...

I was pretty surprised with the output, I figured there'd be hotspots and shadows but I think if they were a little cheaper they'd be a decent buy. I can tell they definitely went cheap on the housings, they flex a lot more when mounted than the stock ones do. I'm still waiting for the Form...

I'm still trying to get them working right. The DRL's, turn signals and high/low beams work with no issues. The parking lights work when the switch is set to parking lights or headlights on but when the switch is in auto the parking lights won't turn on. I've tried everything except for a LIN...

They definitely were, luckily it was a short drive on some back roads by my house. I set them at a 2" drop at 20' but I think maybe my back tires were on a bump or something. On the drive I noticed the cutoff line was visible on stop signs a couple hundred feed away and when I got home and...

I have a few The first picture is low beam, second is high beam. New lights are on the top in both pictures. I lowered the aim a little since taking these pictures though.

They shouldn't need to remove the diff but just a heads up in case they really want to. It won't come off without removing the transmission or cutting some castings off the engine block. When you unbolt it to find that out the transmission fluid starts pouring out and there's a conical seal in...

I don't think it is but I've had my bumper cover off at least 10 times. The bumper cover is the hardest part, after that it's just 3 bolts for each light. I installed the eBay headlights a few weeks ago and it took maybe 2 hours.

A screen pops up when you first connect to your truck with Forscan, it has a little information about your truck and asks if it's the right vehicle. Choose no, if you choose yes it loads a profile with all the modules your truck had when it saved that profile, including the sync 3 apim. If you...

I used Ryan Martin with Engineered Motor Solutions. I did e-tuning and it took 6 or 7 revisions. I'm happy with the tune and the tuning process. He was able to turn on Select Shift to get the paddle shifters I added working right and I've heard some tuners aren't able to do that.

Yeah, the silver set does have some wear, pitting, and dings. I don't have any pictures of the fitment but I can take some when I get my truck back from the shop.

Yeah, I still have them.

This harness It is doable, I made a no cut harness for about $40. I used This harness and got a replacement pin from an escape at the junkyard. I added the replacement pin to the open spot on the Lariat turn signal plug and connected it to the parking light wire on that harness and it worked.

I saw the ones from Ford, hopefully the Form ones come in cheaper than that but I bet they'll be close. I bought a set of the aftermarket BAP taillights for $250 about 6 months ago and I'm happy with them. I ended up making offers on a bunch of the projector headlights on eBay and picked up a...

I was able to find part numbers on both sets. The black set is 5425-5425b8-WC, they come up as a set of lugnut guys spacers. https://lugnutguys.com/products/wheel-spacers-5x4-25-bronco-sport-1-25-thick-14x1-5-studs The silver set is 5425463450B they come up as a set of CustomMadeOnly(eBay)...

I honestly do not know, I bought them used from someone local and didn't ask. But I'm guessing at least the black ones are no name eBay one's. The black ones have a number stamped on them, I'm not sure about the silver ones but I'll check when I get home from work.