Search results

It’s on the passenger side toe board real easy to get to.

I used OBD Link Ex, it’s designed for Forscan and Ford vehicles.

I only used one . i only used 1 , look at the 7 or 8 pictures it shows the part numbe.

If you go to my first post the part number for the switch is there , just google the number and should be able to find it.

on forscan I went to the BCM control module and scrolled down and found the switch to enable the fog lights . On the first page you can see it on Forscan.

Correct

Yes that’s the plug I used ordered two but only needed one , when I ordered the du2z-14474-da it showed a five pack but only one was shipped ,if you get the correct plug end you could make your own wire.

You’ll need the wire plug for the BCM, I used the DC not sure about the DB or the DBW. Only problem I’ve had is when an update is done from ford I have to reprogram the lights not a problem tho .

Yes you will have to reset your Forscan settings , had the update done and had to reset my bcm for my fog lights

Looks great ,did mine the same way back a few months. Today I had software updates and went back on forscan to reprogram my fogs and having problems getting it set up keeps showing on forscan an error reading DTC my have to contact forscan and hope they can help .

Trigger wire

The green wire from the bcm connects to the switch wire on DD harness

Thanks , on this forum is where I learned too.

Yes I got the F150 hybrid headlight switch since my truck is hybrid i needed it for the fuel door, I posted a full write up last month on the forum DD fog light kit install

Here are some of the pictures

I did a write up last month when I did mine with pictures and the forscan , I wired everything up just like DD shows on the install video, except using their switch I bought a F150 hybrid headlight switch and ran a wire with the pin / wire setup from ford , I ran the wire from bcm over to...

I installed the DD fog light kit and used the f150 hybrid headlight switch and mine turn off with high beams on , used the DD wiring harness but didn’t connect into the headlights ran a wire from the bcm to the switch wire on the DD harness works great just like factory.

Now that would be cool ,I’ll have to go through forscan and try it.

Looks great

Thanks I’ll have to check that out.