Search results

Oh you did it , nice work man, everyone doing it with zep since I posted it :LOL:. can you take a closer pick at your led bar.

so you did'nt use any camber bolt ? thatss nice

isnt that a moisture vent tape? I could be wrong.

Do you have a link for the 1/4 wheel spacer, i'm doing the same set up with edge st wheel

let use know when you have it done :) , I be installing the same lowering spring on mine , I juste want to know if alignment spec will be good with only front camber bolt . I be installing 21x9 and dont want to ruin my tire with bad spec

DId you get a alignment yet ? how was the spec after

what is the part number for the springs thx

same problem here , it always do it in auto mode

ahah

wierd here in canada we have it at the home depot show us some pick in the process :)

straight up concentrate , let it sit for 20 min , change the orientation if necessary empty the zep , first rinse with water from bath tap , thats what a did and rinse with distilled water after 3-4 time to remove water mineral remove as much of distilled water and blow compressed air inside ...

nah, you need to take them apart, so that the low and high beam reflector does not get touch by degreaser

Yes its only and plastic reflector, remove it and tape the parts that you dont want to blackout , use a good tape tho.

took the bulbs out and pour the tailight full of degreaser, and Rinse with distilled water. will only work with non lariat lights

Cant do that , you would remove to reflective chrome for the low and high beam.

I just filled them up with zep and rinsed with distilled water and let them dry after. No stain spot

ahah thanks, I saw your post and registered to the forum XD, you were my first ahaha , I did the same method with the tail lights and added lastfit led

I did, took me about 1h for the set to pry them open, they need to be always hot when playing with the housing, the bottom lip of the headlight is really easy to break . Permaseal is really hard to remove , it break by chunks. you can follow on youtube how to open permaseal headlight. Start by...