Search results

Just move that stack over to the Maverick, instant 6k tow package.

I'm on the gulf coast. Found some inlets to hide from the wind, but it's been bad so far this year!

Kayak is a Crescent CK1, 11.5 feet long. Didn't catch a thing but it was a great day on the water.

Thanks for the great tutorial. It got me up and running with a Bronco Sport leather steering wheel. Forscan just released 2.3.47 and I was finally able to access the ABS module to set the cruise control value. All factory spec now!

These are the parts I used. Didn't do a write up with pics. Simple wiring. All negatives together and two switched positives from the factory bed 12v supply.

This is my cheap USB/12V socket and bed light solution. Panel, switches, and light all from amazon. The socket panel originally had a voltage display, but I removed it and added a switch. One switch for both outlets, and one for the light. The light required a little trimming to fit as the...

Quick update on this rack. Clamping it on with just the included rubber pads was resulting in warping of the plastic bed rail caps. I took it back off and cut down some vinyl plank flooring scraps to the same dimension as the pads. Placing these on top of the pads distributed the pressure and...

Did my first road trip in the XL Hybrid this weekend. I left Panama City, FL and traveled to Ocala, then down to Bradenton. Filled up in Plant City on my way back north. This trip was mostly 65+ mph. At my refuel the dash was showing 41 and math at the pump confirmed 40.5 for the tank. I did...

No modification of the clamps were required, just shortened the uprights. I don't think this will work with a tonneau cover.

No, the rails are original length. 9 inch overhang each side.

I just joined the forum, but haven't seen anything on the universal Werner rack from Lowe's. I purchased it for $369 and modified it to fit. In standard form it was way too tall. I used a metal blade on my miter saw and cut 7 inches off the bottom of the uprights, then used the scrap as a...