Search results

Like we said, it is available in literally hundreds of colors, and Matte Black is an option. 😀 As as well as Matte Metallic Gray, Matte Metallic Blue etc.

It's the size, not the complexity. This is essentially a precision precut hood wrap. You will not have to try to trim along the hood lines using masking tape, knifeless tape, etc. Will be produced in the highest quality Cast vinyl, in a wide choice of colors. in either Dry-Install or...

https://www.mavericktruckclub.com/forum/threads/new-hood-blackout-decals-available.48398/

We have had several requests for a hood blackout covering the main hood section, rather than just the center. We think this will assist those of you that experience glare from you hood while driving. We recommend purchasing this in Wrap material 3M 2080, Avery SW900, Oracal 970RA, this material...

Wet-Installation vs Dry-Installation. This article is the second in our Vinyl Graphic Education Series, where we answer common questions we get from customers. This question can be more complicated than it sounds because the installation method depends not only on the material type but also on...

Hindsight, and all that. 🙂 You're not alone, we see it frequently. And it's not a bad thing to want to protect your investment. We have actually seen a few posts on here about the roof ridges, and have wondered if there was ceramic coating involved, because they're not that deep, and graphics...

Hi Superg0 , Firstly, love your Maverick! Basically if you have ceramic coated your truck, you are going to have issues applying graphics to the surface. This especially applies to wrap material! Vvivid Cast films are good films, we actually use them, however, they are wrap films, and the...

Cast vs Calendered Vinyl Films. The most common questions concern the vinyl films used for vehicle graphics. So we thought we would write a series of articles about vinyl films, installation types, pros and cons, cleaning and maintenance etc. This article may be long, but we hope you find it...

Climb through the windows. Dukes of Hazard baby! 🤣

https://www.mavericktruckclub.com/forum/threads/new-upper-bed-side-and-upper-tailgate-accent-stripes-now-available-for-the-maverick.47611/post-833686

It would be available in any color combination. Like we said, would be available in one to three colors, all selectable.

Was that this... https://www.mavericktruckclub.com/forum/threads/new-upper-bed-side-and-upper-tailgate-accent-stripes-now-available-for-the-maverick.47611/post-833686

Maybe black, green, silver for the hybrids.

Hi Guys, Been toying around with a new design for a Maverick stripe, would like some opinions, to see if it's worth putting into production... So this would be a one to three color stripe, with all our color options available for the three colors. I would be configurable in various...

Anything is possible :) So, being a three color stripe, this could be configured in any three colors, two stripe with a space, or a larger stripe in color A and a thinner stripe in color B. This is design to fit below the door, bed upper most recess. Also been playing around with this idea...

Fishing line also works well. Especially if you double it up and twist them.

Yeah, we do both types, one for the cab, below the windows, And now the top edge of the bed sides and tailgate to match.

Something like this? As for installation, they are will be pretty easy, as they are not very big.

Hi, We can do that. We'll get you some proofs later today.

As with all things there is a technique. :) You did a nice job with the method you used, and if you're happy that's what counts. 👍