Fitment (coverage and the ability to fit the anchor pegs) and the ease of removing and cleaning. I had some rubberized mats in my former vehicle that I could hose down and lay in the sun for a quick dry while I washed the truck.
The clips that hold the line can be opened with a small screwdriver to allow you to place the cable slack around the mounting point.
I had the same issue. Redline sent the original order UPS, the replacement part by USPS, so the install had to wait about a week.
With the cold temps here in western NC, tire pressure checks on the non-nitrogen filled tires is a regular maintenance check. Also, removing the remaining willow oak leaves from the engine compartment and windshield base to allow more air flow was done.
Relating my own experience, I had downloaded a digital book from the library using their Overdrive application (no longer available, replaced by Libby.) The audio book, Holly, by Steven King, had around 13 chapters, each chapter had about 15 mp3 files. A total of around 188 mp3s. I stripped the...
I went with the OEM tailgate cover. After using the current discount code you would see at the top of the accessories page, and applying remaining points you might have, you get pre-drilled holes and the spacer kit required for a somewhat reasonable price. Shipping is free to your dealer. The...
After 10 days, the order (tailgate cover) was showing in transit. I called the dealer, they had the part. The problem was that Ford didn't give them my contact number, just my name.
Call the dealer.
Bob,
I was thinking along the same lines as Glen. I believe there were 2 different plates from Rival depending on your Maverick model. Of course, now that you've fitted the plate, perhaps the point is moot.
Somehow I managed not to avoid a toxic spill when changing the the oil after the plate...
Tony,
Sorry no pictures, and the rear bolt install was really fiddly, so I'm not inclined to drop the plate to take a picture. ('23 Lariat Hybrid.)
But I remember, in my aging capacity these days, there are several holes forward that I used to get the nuts into position. I spent too much time...