Search results

I got the rubber OEM’s from Ford on the order. Love the fit and material. We live on a gravel driveway so need something that can deal with mud and easy to pressure wash.

FYI, conversation about this going on in this thread. https://www.mavericktruckclub.com/forum/threads/pac-lphfd31-wiring-to-amp-and-speakers.60174/

Thank you, I have some of these. https://www.kicker.com/KISLOC2 Next thing I’m going to try if it happens again.

Using the Pac wiring harness, coming from the radio and the back into the speaker wires at the head unit, the connectors only go one way. I’ve triple checked and the wire colors match up. The entire channel stops playing and as mentio there is just a sound in two beats you hear, babump, babump...

No idea, think maybe had to do with having a tweeter hooked up to the factory wiring, 4 ohm vs the ohm factory, I just ran wires from the crossover. But then got everything buttoned up and then 500.1 stopped playing bass. Come to find out, it would only produce sound if I took the balance and...

I’m splitting the front channels before going into the amp and don’t think this has anything to do with an intermittent issue I’m having but haven’t found anything else. When testing and trying to dial in amps, I’ve had the front left speaker/tweeter stop playing music. Some type of small...

Doesn’t appear so. I don’t have that option in the 25 beta version and thus the ask. I have it for some of the modules but not the ACM.

1 - I’m using the pack 17 extension wires, ran to the back. I initially used a y splitter wire I got off amazon to split the front channel. I’m having a weird issue with the right front speaker now in that sometimes sound stops coming out of it and it just has a 2 beat sound coming out. 2 -...

Trying to install some amps and speakers. I’ve gotten the beta for a 2025 Hybrid to load but doesn’t appear to have the ACM option that shows the different sections, only the module numbers and field values. Does anybody know for sure the module numbers to: 1 - Set EQ to flat 2 - configure the...

Interesting, I haven’t messed with the auto tune, but the amp does have a gain adjustment for amp 1 (Front in my case) and amp 2 rear. My plan was to set the proper voltage at the speakers or use the gain and the clip led on the amp. Seems to get the proper amount of sound out of what the...

I have the pac wiring harness and their extension. I’m not thrilled about the gauge of factory wiring but this amp is small and limited and with the hybrid I don’t want to push it with anything more than these two Key amps. The setup is ok, I was mainly just curious if you hooked up the woofer...

Key 500.1 amp for sub Key 4 channel amp for the speakers. The ask is not about cutting the tweeter wires but the woofer wires in the doors. What I could do is cut the return speaker wires from the amp, in the dash, then continue you the woofer through to the current wiring and then wire to the...

You could take a magnet from bolt grabber and some printing paper and have what you have with the stock speakers. I’m amazed sound comes out of them.

Posting as have truck apart and spent hours scouring through threads and starting a specific one. 2025 XLT Hybrid. - I purchased a usb obd for forscan. But the ACM option isn’t complete to allow adjusting without doing so manually. Upgrading the rear speakers with kicker 4 inches. Front are...

Thanks I was hoping for a spray or such, trying to get a tape like that on the backs properly would be a pain. Plus these are raised to start with so don’t need the added with of tape. But I’ll try to see what adhesive it is uses. There are these...

Hmm, the ones I got had some kind of thin clear adhesive if you can call it that. Contacted and got the typical, it’s never happened. However, the protective plastic on the other side had a better bond than the adhesive side. There is some 3 emblem adhesive, but some of the reviews, shows it...

Any suggestions on adhesive to use for sticking. Not too strong. I ordered some off Etsy and they don’t stick well at all. (Yes was prepped.). Was going to start a thread on this but will see if anybody here has any suggestions.

I haven’t read all the threads, but I have a 2025 XLT Hybrid, upgrading the speakers an adding an amp. The door speakers are junk. Paper, small magnet, compared to the kicker 6 3/4’s going in, several pounds difference in weight.

Just got my usb obd connector and Forscan license. In the middle of stereo upgrade and just want to set the EQ to flat. 2025 XLT Hybrid. Seems for the ACM, there is only as built. Does anybody confidently know the module code to set this and the values to set? Thanks

I just got my obdlink ex, used the test version listed above. Just got the extended license and can confirm I can connect to my 2025 XLT hybrid. I'm upgrading the stereo and planned to set the EQ to flat. However, for the ACM, all that's available seems to be the AsBuilt option and I don't...