Search results

Come on AWD kits!

Would you mind hurrying up then? :p

I wanted to update this thread since my (and likely others) overhead console tabs were in a different location than the OPs. This type just takes some leverage on the rear corners rather than needing to release the metal locking tabs, since those aren't present with the sunglass holder version.

Ok, now I kind of want to put the Maverick on air...

FWIW, I talked to some folks at Ford Performance and while they let me know they could not say if a product that was not yet released was in development, they did state that no one was aware of any tune for the Maverick planned or in the works at this time (About 6 weeks ago). Doesn't mean it's...

Is there enough injector for ethanol or are you talking the old standard Ford E30 routine?

Just for info, I installed the below lug nuts on my Maverick recently and grabbed a few images to show the results. The first image is the overall difference in size, which is not much. The second is the box with part # for anyone wondering, and the third is an image showing them installed on a...

The 'ole reverse remote start.

I noticed the tires were spraying the leading edge of the door handles, along with the lower doors and rocker panels. Installed the splash guards and all that went away. Over time that could have caused some issues for sure.

That's often increasing the apply pressures/reducing the time to shift to protect the clutches and transmission parts from more slipping under higher tq loads as a separate tune for the transmission available from a decent 'professional' tuner. It's usually a benefit for those reasons and...

It does not. It's a twin scroll I believe, and I don't know of a domestic gas vehicle build with a VGT setup currently.

Just an FYI for some of these older mirrors with Homelink: There are like 5 or more generations of Homelink, and depending on the age and brand of your garage door, the mirror may not work directly. Using one of the Homelink repeater/adapters may be necessary. They aren't expensive and are easy...

I know I'm late to the party probably, but a tiny bit of construction adhesive on the barrels of the T nuts goes a long way to saving headaches if you ever need to disassemble. I've had a couple spin free in the past and having to remove the bolts then gets much less fun.

Do you recall what size you ordered?

It's technically called the sun load sensor by Ford, but the above is absolutely correct!

Just remember that DOT 3, 4, and 5.1 are compatible, but DOT 5 (silicone based instead of glycol based) is NOT compatible with the rest. Every 3 years is probably a fine recommendation for anyone as there are so many varying climate differences, driving styles, etc. The truck is far from high...

Much appreciated!

I've got a bed extender on the way and am currently trying to decide on a tonneau cover. One option on my short list is a retractable unit, but I don't know if it will fit with the bed extender installed. Could someone measure the distance from the bed extender to the front of the bed in the...

You mean like the calm screen?

Oh man, where did the bed extender go!? Edit: Super weird as the site is hiding a bunch of products now, but if you search they still show up.